Bofors Gun Questions

[Brad Deckard]

I have solved this.... I managed to get a manual dated 1953 and it mentions this lever in full with diagram. The lever was an addition added in about 1953, the manual states this is a new modification which is being fitted to bofors guns.
The lever is an indicator to tell the operators the condition of the breech. eg open or closed. it is not a mechanical pointer which moves as the gun is operated. It is a HAND OPERATED INDICATOR. when the guns breech is closed the indicator will be pointed at CLOSED. If by hand the operator trys to move the indicator over to point at OPEN it cannot be moved. ( the cam position inside stops the lever moving to the open position. Thus the operator knows the breech is CLOSED. If however the breech is OPEN , the pointer is still pointing at CLOSED.... BUT when the operator phisicaly moves the pointer towards OPEN, the lever will move across and can be held pointing to OPEN.. thus the operator knows the breech is OPEN. basically.. if the breech is open the lever can be moved, if its closed it cannot be moved. Thus the position of the breech is know without peering inside.

[tankbarrell]

Well done for sorting that out Brad! It's not something I had come across.

[Brad Deckard]

Took me a few years to understand it, I was looking too hard.. why was it not moving as gun was cocked!! Now i know.. its a manual lever operated by hand!! not by the gun mechanism..

This manual also answered another question, My firing pins have TWO springs to operate them behind the striker. One big spring and a smaller one fits in the middle of the big spring.. This is normal and correct. double spring for maximum thrust. I didnt know why it has two springs, I have five of these guns and all are the same.