New member, please help me ID!

[alleramilitaria]

remove the cooling system (leave the oil cooler), unbolt the 3 linkagas, unbolt and plug the oil lines, unhook all cables, unbolt the 2 motor mounts, hool chain up to the heads via 2 or 4 bolts depending on your sling. then the fun begins.

check to see if your trans to rear end cover is still there, if so unhool it, and slide it out of the way.

lift up on the eng/trans slowly about 3 to 5 inch. dont pull it stright up, pull it at about a 30 deg slope with the eng nose up.

push the eng and trans forward and the trans will slide out of the rear end. then just go stright up.

did i miss anything???????? nope.

the fun is getting it back in.

and yes take LOTS of photos. dont throw away anything, you may need to take something to the local parts place to make a match.
if you can use a digital camra, that way you can take thousands of pics.

thanks, and good luck
dave