|
|
|
|
#1
10-03-19, 11:34
|
||||
|
||||
I wondered about that box Ron, scratching my head as to its use ?
The pictures have answered my query perfectly Michael, the 21 / 22 carrier bolts straight to the track guard and seat base, unlike the mk1* which has additional bracketry  All interesting stuff, I am looking forward to having a fully working period intercom in my current carrier....I have no doubt the sound quality wil be terrible though 
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). 
|
|
#2
10-03-19, 12:09
|
|||
|
|||
|
The 19 set intercom is fairly good but you have to keep the mic rubber piece touching your mouth and speak clearly!
__________________
Adrian Barrell
|
|
#4
11-03-19, 11:36
|
||||
|
||||
|
Ah, Rodger that.... I have a lead into the psi with bulldog type clips on the other end ��
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#5
11-03-19, 20:09
|
|||
|
|||
|
19 set mount
The mount shown in pictures 3 and 4 is a WS-29 set mount as shown in "Installation Instructions Wireless Set No. 29 kits installation AFV Ns. 101,0102 and 104". Pictures on page 18,20,23, and 57 part number ZA/CAN 2384 Plates, adaptor, Carrier, No. C1. This plate was also used to carry the charging set. My scanner died so I can't post pics.
__________________
Roberta Jayne Melville CD II QJ MK I * universal carrier 1942 WLC Harley under restoration 1957 M38A1 jeep R.E.L. optical equipment Military manuals Field phones MK II 19 set (needs work) 4 MK III W-19 sets AN/PRC-9 CPRC-26 WS-29 componets WS-38 AFV WS-38 MK III WS-48 with generator WS-58 MK I MK V heliograph
|
|
#6
13-03-19, 13:16
|
||||
|
||||
|
Does anyone have any information regarding the fitment of either WS22 or WS19 in Loyd Carriers? All TT Loyd left the factory with an Ariel base mounting plate fitted at the front left of the upper hull and in 4.2" Mortar stowage diagrams a WS22 is mentioned as located in this same area of the vehicle. However discussions with other Loyd owners has suggested that this may just be a stowage location for the man pack rather than any form of semi permanent installation location. Thoughts?
__________________
Alastair Lincoln, UK. Under Restoration: 1944 No2 MK2 Loyd Carrier - Tracked Towing 1944 Ford WOT6 Lorry The Loyd on Facebook
|
|
#7
20-03-19, 10:16
|
|||
|
|||
|
Dose anyone know what the bracket that the Variometer and Remote Control are attached to looks like, and measurements please.
Thanks Stephen
|
|
#8
16-06-21, 14:06
|
|||
|
|||
|
Hi it seems that installation of the WS19 in my carrier is on the list and I must say that Im bit confused. Its rather clear how to install set in Mk.I carrier but not perfectly sure how to do it in Mk.II or even in Mk.III.
I found pictures from Michael R. very helpful, they are so far the most clear ones. But of course, they are for Canadian made carriers which could means that there are differencies to the british ones. Does anyone got AVS's Ns. 101,102,104 as Roberta mentioned, please? Propably they could shine some light on it? My Carrier has in front and in the rear bars for "quick change" of the WS set and/or chorehorse unit. Have no idea which carrier should be used on them. No.21, No.22, No.25 (modified?) or even some other? Thanks for help
__________________
UCw Mk.III
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
