Looking for CMP 4x2 information.....

[Owen Evans]

More photos....

[Owen Evans]

Last lot for now. Shout if you need any other details....

Owen.

[Bob Carriere]

Thanks Owen....... 1798276.....matched to Hyatt barrel roller bearings. To my knowledge, based on the GM manuals at hand, that shallow adapter was CMP use only!!!!!!

Nothing like that on this side of the Pond unfortunately..... However...... I am following up on an external clue.

It seems that the bicycle ball bearings are in most front axle of Civvy trucks and this stayed until at least the early 50s.

The clue to the HD axle and roller bearings is the cover in the center to wheel.... inside the 5 big wheel nuts..... the regualr axle model has a stamped/formed grease cover that is recessed into the hub..... the end of the cap is hex shape like a large nut....... on the HD...... they have a flat or domed sheet metal cover held by 4 or 5 or 6 small 1/4 -20 bolts........ the hub of the C15 has 6 little bolts holding the domed cap.

I am pursuing a Maple Leaf truck circa 41/42 that has a sheet metal cover over the bearing with 4 bolts...... waiting to get it home to take it apart and confirm my assumption that it has roller bearings......

Thanks for all your help Owen.......Alex and others who have replied on other threads.

Here the snow and ice as almost vanished which will let me get my hands on the 1940 1 1/2 ton Civvy Chev from the back field.....just need a wek or so for the ground to dry up or risk sinking to the belly of the tractor.

In the absence of original C15 HUBs I will get adapter plates that will allow me to bolt CMP rims to the adapter plate which in turn will bolt on to the 5 or 10 bolts pattern of the GM civvy Hub.

[Bob Carriere]

I found a whole bunch of parts vehicle all to the credit of MLU.

I have now acquired a C15 for the power train offered by a MLU member.

Found a 41/42 Mapleleaf HD with cab....no box from another MLU connection.

Found a rolling chassis of a 2 1/2 TON 46 Chev that even has the extra frame reinforcement plates........again an OMVA/MLU member....

.....and a tubular Ford front axle from another MLU source.

Now I think I have enough to build an early smaller 1940 Egypt crafted LRDG and a larger repro of the Canadian built 42 "waterfall" grill LRDG model.

Sadly the front fenders (4 of them) of my civilian 1940 Chev may be rusted beyond repairs and may have to buy used steel fenders from Ebay or use Canadian made fiberglass front fenders....the early model will have steel 1934-35 rear fenders. Fiber Glass vs steel will depend on whether or not I will need to widen the front fenders???

Thanks for all the help from MLU....comments, suggestions, old pictures of the real thing, etc ............

Will need to catalog what I have and sort out sets of parts for the different models. Meanwhile I need to replace a 25x40 dry equipment shed that collapsed on the last wet heavy snowfall.....and that will eat into my free time. Plans are for sea cans and covered span between two boxes.

Will continue to scrounge for fenders,running boards( may make my own), better 1940 hood and other tid bits....such as an vintage old style 25 to 35 fuel drum for mounting as a prop inside the cargo box........collect some more POW cans, helmets to hand here and there, ....... May look into importing a RHD steering box from Australia for the 42 conversion..... they apparently grow on trees there!!!!

With the advent of plastic containers you would be surprise how hard it is to find older steel fuel drums particularly those stamped Shell, Imperial Oil, Standard Petroleum /Oil. etc........ seems most of them are in Jamaica used as musical instruments..........

Meanwhile, I have acquired a few more 40 era GM parts manuals and will help anyone in search of specific information.

Pictures will be posted as I get my hot sweaty little hands on the treasures.

Cheers

[Owen Evans]

Looking forward to seeing your progress on this one!

Originally Posted by Bob Carriere

Will continue to scrounge for fenders,running boards( may make my own), better 1940 hood and other tid bits....such as an vintage old style 25 to 35 fuel drum for mounting as a prop inside the cargo box........collect some more POW cans, helmets to hand here and there, ......

Maybe you could knock a few of these up to use as props too:

http://www.mapleleafup.net/forums/sh...ad.php?t=25373

Good luck!
Owen.

[Grant Bowker]

Originally Posted by Bob Carriere

With the advent of plastic containers you would be surprise how hard it is to find older steel fuel drums particularly those stamped Shell, Imperial Oil, Standard Petroleum /Oil. etc........ seems most of them are in Jamaica used as musical instruments..........

Take a tour around the radar sites up north, it has been claimed there were millions of drums left up there that the eco-conscious would thank you for taking away..... It's not mosquito season up there yet...

[Mike K]

Bob

You will also have to find a RHD clutch shaft .

I have a Chev truck (1939 and 40) NASCO parts book for the local GMH RHD assembled 1/2 to 3 Ton models, if you need a part number let me know . NASCO was the Aust. GM parts division: National Automotive Service Company.