|  | 
| 
 | |||||||
|  | 
|  | Thread Tools | Display Modes | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Camel back 
			
			I see they used 'Camel Back' drills ... still see them around , I've got one .
		 
				__________________ 1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Thought I had found your axle.... but is is an 8-bolt hub only. http://www.mapleleafup.net/forums/sh...834#post284834 5647933.jpg 
				__________________ Regards, Hanno -------------------------- | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
|  A new version..... 
			
			Hi Hanno Hi Philippe What you have is a whole new and different type of adapter......... it has the CMP bolt pattern(8) ....similar to the C15 4x2 but much shallower....as in closer to the brake drum......... the C15 does nothave those smaller nuts showing and is bolted from behind like the civilian ones. The centre bearing cover is also unique being of a stamp metal screwed in to the hub,,,,,typically the bearing cover for the HD Timken bearing set up has a domed cover held by 4 small bolts/screws...... any idea what it came from???? Been very cold around here lately.... at night minus- 25 to -29C with a windchill factor of -35C.....very little snow so far but bitter cold. Cheers 
				__________________ Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada | 
| 
			 
			#4  
			
			
			
			
			
		 | |||
| 
 | |||
|   
			
			Is it possible that the hub in post #29 is a more modern (50s or 60s) one, maybe Bedford ? David | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 | 
|  Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post | 
| 16" 8 bolt Split Rims for 1.5 ton Australian Chevrolet Trucks | Philippe Jeanneau | The Softskin Forum | 66 | 13-08-20 15:17 | 
| Front Brake Drums-10 bolt Front Hubs for 1.5 ton Australian Chevrolet Trucks, 40-45 | Philippe Jeanneau | The Softskin Forum | 1 | 10-04-19 20:51 | 
| 10 bolt Front Hubs for 1.5 ton Australian Chevrolet Trucks 1940-1945 | Philippe Jeanneau | The Softskin Forum | 0 | 31-03-19 17:13 | 
| Ford mod 1940, probably Australian (?) on Eastern Front | Ivan Podgornov | The Softskin Forum | 8 | 05-09-15 05:10 | 
| Wanted CMP 2wd front hubs | McDell Bros | For Sale Or Wanted | 0 | 22-09-09 02:19 |