![]() |
|
#1
|
|||
|
|||
![]()
Thank you Chris!
__________________
UCw Mk.III |
#2
|
|||
|
|||
![]()
Licenses:
Joe a radio tech in Stittesville (Ottawa) explained it to me as a bandwidth issue, some bands can overlap and the width of the signal being broadcast (old tech) can interfere with the bands used by Air Traffic Control. Certified operators are educated about these matters. Only the challenged tread here without the proper skills. Joe has rebuilt all my WS19 sets and PSU's for $60-80. He disables the TX making it a Receiver only. I have never checked, but I think he just disconnects a tube and insulates the lead. Bren install: I have never seen the canvas covers over the 6/12 point cables, are these standard issue with the installation kits? Geoff |
#3
|
||||
|
||||
![]()
I guess the canvas covered cables are prudent for an installation that is susceptible to the elements. I've no idea what the cables in my own MK2 were originally designed for, but the long one was perfect length to connect between the junction boxes via the Ronson hole
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|