Getting Restoration Bren carrier MK2

[rob love]

I notice you are using straight hoses on the lower rad to water pumps. Although you are using silicone hose, which will bend reasonably easy, you might want to consider using the preformed rubber hoses from a 52 Ford. It reduces the stress on the lower rad outlets.

Check this link where we discuss the lower rad hoses: http://www.mapleleafup.net/forums/sh...ad.php?t=24900

[Tom Millward]

Originally Posted by rob love

I notice you are using straight hoses on the lower rad to water pumps. Although you are using silicone hose, which will bend reasonably easy, you might want to consider using the preformed rubber hoses from a 52 Ford. It reduces the stress on the lower rad outlets.

Check this link where we discuss the lower rad hoses: http://www.mapleleafup.net/forums/sh...ad.php?t=24900

Hello gents,

Be aware that if you have to change your water pumps to the new version with better sealing, the preformed lower hoses will be too short as the new pumps have shorter outlets. (see my post in the restoration forum).

[Petr Brezina]

Hi Israel, here is the pic which could help you as well.

[Israel Berko]

In the Corona era, we stopped working on restoration. Now we are back, the engine is installed with pipes. I worked on adjusting the braking and steering rods. Attached some pictures.

[Israel Berko]

Today the Bren is finally moving there is still a lot of work to do but for the first time we took the Bren out of the workshop for testing there are many more things to do and work on it but we can say that we are in the right direction there is tremendous progress.

https://www.youtube.com/watch?v=EMy1Xmi6Ac0&t=5s

https://youtu.be/EMy1Xmi6Ac0

We look for the problems that pop up and fix what is possible inside the Bren we plane to take out the gearbox, Engine and radiator and after painting bring back inside all parts.
And final issue is the panel wiring and lights, so a log way to go...

Israel

[Itzik Merkado]

Hi everyone
As you can see we work fast ...
And it will soon be possible to announce the end of the project
We are currently working on some interesting vehicles
One of them is HUMBER

Visit the video at the link
There are a lot of films related to the project

https://www.youtube.com/watch?v=EMy1Xmi6Ac0&t=9shttp://

[Israel Berko]

After replacing the carburetor the Bren behaves much better

https://www.youtube.com/watch?v=pmBojV0d5uc