Armour Dreams - MLU FORUM

MLU FORUM

		MLU FORUM > MILITARY VEHICLES > The Armour Forum
Armour Dreams

Mark Forums Read

PaperClip

Jonathan Moore Armour Dreams 10-06-17, 10:42

PaperClip

Jonathan Moore more pictures 10-06-17, 11:06

PaperClip

Jonathan Moore and some more 10-06-17, 11:20

PaperClip

Jonathan Moore and some more 10-06-17, 11:28

PaperClip

Jonathan Moore and that's it for now. Jon 10-06-17, 11:33

colin jones Excellent fabrication there... 10-06-17, 14:04

More replies below current depth...

PaperClip

Jonathan Moore Apart from a few other... 19-08-17, 22:36

PaperClip

Jonathan Moore A few more pictures 19-08-17, 22:43

jdmcm the only word I can think of... 20-08-17, 02:38

PaperClip

Jonathan Moore Today was the big test,... 24-08-17, 20:22

PaperClip

Jonathan Moore One thing that has been... 12-09-17, 21:42

PaperClip

Jonathan Moore Three more. 12-09-17, 21:47

PaperClip

Jonathan Moore Flat pack panzer 2 upper hull... 15-09-17, 23:19

colin jones John, excellent job you're... 15-09-17, 23:27

PaperClip

Jonathan Moore Evening all, I have been... 25-10-17, 21:25

PaperClip

Jonathan Moore Some more pictures 25-10-17, 21:35

More replies below current depth...

PaperClip

Jonathan Moore There doesn't really seem... 10-12-17, 10:13

kevin powles Looks suberb, well done. 10-12-17, 13:01

James P Really amazing fabrication... 10-12-17, 20:39

Jonathan Moore I am glad that it meets with... 10-12-17, 22:39

David Dunlop Jon, Nice work. I... 11-12-17, 01:59

Dave Newcomb Engine rotation direction 11-12-17, 02:22

Jonathan Moore David, You are right... 11-12-17, 09:56

James P Paint on vehicles, always a... 11-12-17, 13:52

PaperClip

Jonathan Moore Quite a good day today, lots... 11-12-17, 19:43

PaperClip

Jonathan Moore update 19-01-18, 21:54

PaperClip

Jonathan Moore All ten suspension arms are... 19-01-18, 22:04

David Dunlop Is the cake still there??? ... 19-01-18, 23:15

Bruce Parker (RIP) I bet the chocolate lab got... 20-01-18, 00:11

Jonathan Moore The dog didn't stand a... 20-01-18, 10:24

Bruce Parker (RIP) I think your description of... 20-01-18, 15:11

PaperClip

Jonathan Moore A mans got to eat and my wife... 21-01-18, 18:37

PaperClip

Jonathan Moore A couple more pictures. Jon 21-01-18, 18:42

PaperClip

Jonathan Moore Evening all, I have... 09-02-18, 22:06

PaperClip

Jonathan Moore a few more 09-02-18, 22:12

PaperClip

Jonathan Moore and finally. Jon 09-02-18, 22:15

PaperClip

Jonathan Moore I have at last, managed to... 08-03-18, 19:05

James P That is very, very,... 08-03-18, 23:01

Jonathan Moore Thanks james, very kind of... 08-03-18, 23:38

James P Jonathan keep on doing what... 09-03-18, 02:12

PaperClip

Jonathan Moore Track return roller shafts,... 13-03-18, 20:24

PaperClip

Jonathan Moore I have been busy making the... 01-04-18, 22:22

PaperClip

Jonathan Moore Once the main hub housing is... 01-04-18, 22:29

PaperClip

Jonathan Moore Finally, the finished... 01-04-18, 22:48

Ganmain Tony Incredible 04-04-18, 11:45

PaperClip

Jonathan Moore Hi Ganmain, I guess here in... 18-05-18, 18:02

PaperClip

Jonathan Moore more pics. 18-05-18, 18:12

PaperClip

Jonathan Moore Finally a finished wheel. ... 18-05-18, 18:36

PaperClip

Jonathan Moore Morning all, I now have 10... 14-06-18, 09:54

PaperClip

Jonathan Moore The last picture is for... 14-06-18, 10:00

ajmac Excellent work, a good thread... 14-06-18, 11:53

RichardT10829 Just spotted this thread... 14-06-18, 14:04

Jonathan Moore Nice idea but I rather like... 14-06-18, 17:22

Ryan Pz2 repro 15-06-18, 07:25

ajmac The good thing about fuel... 15-06-18, 11:21

PaperClip

Jonathan Moore Believe me, if I could get... 15-06-18, 23:07

PaperClip

Jonathan Moore Evening All, I have made... 12-11-18, 19:09

PaperClip

Jonathan Moore Look what the Birthday bunny... 04-12-18, 19:12

Ganmain Tony Nice 11-12-18, 07:13

Jonathan Moore Not quite, It's a steering... 11-12-18, 09:37

PaperClip

Jonathan Moore Evening All, again, I... 17-12-18, 21:37

PaperClip

Jonathan Moore But it's getting there. 17-12-18, 21:46

PaperClip

Jonathan Moore Last three pictures for now.... 17-12-18, 22:03

karlos59 Coming along nicely Johnathan 17-12-18, 23:08

PaperClip

Jonathan Moore The finished article, well... 19-12-18, 18:53

RichardT10829 likewise with this thread,... 25-01-19, 20:13

Jonathan Moore To be honest very little has... 26-01-19, 16:08

PaperClip

Jonathan Moore Evening All, I have been... 15-02-19, 20:19

PaperClip

Jonathan Moore Evening All, In my spare... 21-02-19, 21:12

PaperClip

Jonathan Moore Evening All, I have been... 28-02-19, 21:56

PaperClip

Jonathan Moore At the rear of the tank,... 01-03-19, 19:27

PaperClip

Jonathan Moore Just one more picture. Jon 01-03-19, 19:29

PaperClip

Jonathan Moore Idler wheel components. 07-03-19, 21:39

PaperClip

Jonathan Moore A few more 07-03-19, 21:44

PaperClip

Jonathan Moore Hello Heinz my dear friend, ... 07-03-19, 21:48

PaperClip

Jonathan Moore …………………... :salute: 07-03-19, 21:52

karlos59 Looking good Jonathan, these... 07-03-19, 23:25

RichardT10829 fantastic fabrication skills... 09-03-19, 22:48

PaperClip

Jonathan Moore Dear Heinz, Once again... 10-03-19, 21:43

PaperClip

Jonathan Moore ……………... :salute: 10-03-19, 21:50

PaperClip

Jonathan Moore I have been playing with my... 18-03-19, 23:14

PaperClip

Jonathan Moore The other job that I have... 18-03-19, 23:19

Mike Cecil Great work, Jonathan.... 20-03-19, 18:14

Jonathan Moore No Problem Mike. In the very... 20-03-19, 23:08

karlos59 Looking good Jonathan 21-03-19, 05:19

PaperClip

Jonathan Moore Talk about high's and lows,... 26-03-19, 10:48

PaperClip

Jonathan Moore First I drilled through with... 26-03-19, 10:54

PaperClip

Jonathan Moore On Friday and Saturday I... 26-03-19, 10:56

PaperClip

Jonathan Moore I have to say that although... 26-03-19, 11:00

PaperClip

Jonathan Moore After all my worrying, I have... 26-03-19, 11:03

PaperClip

Jonathan Moore Evening All, I have at... 31-03-19, 21:44

PaperClip

Jonathan Moore The engine and gearbox are in... 31-03-19, 21:55

PaperClip

Jonathan Moore I have been putting off... 31-03-19, 21:59

PaperClip

Jonathan Moore And finally for now, I have... 31-03-19, 22:07

PaperClip

Jonathan Moore Evening, I have been... 04-04-19, 21:56

PaperClip

Jonathan Moore More pictures of the same... 04-04-19, 22:05

PaperClip

Jonathan Moore These pictures show a little... 04-04-19, 22:11

PaperClip

Jonathan Moore Sorry for the amount of... 04-04-19, 22:17

Ganmain Tony Extraordinary 06-04-19, 23:56

Mike Cecil Hull access plates 07-04-19, 03:43

Lynn Eades Mike, Carrier access plates... 07-04-19, 04:28

Jonathan Moore Morning, Tony, I hadn't... 07-04-19, 10:20

PaperClip

Jonathan Moore Evening, I have... 07-04-19, 10:37

PaperClip

Jonathan Moore This is then welded into the... 07-04-19, 10:43

PaperClip

Jonathan Moore The actual fan bearing... 07-04-19, 10:48

PaperClip

Jonathan Moore The beginnings of the cooling... 07-04-19, 10:52

Jonathan Moore Morning David, I have no... 07-04-19, 11:00

David Dunlop Jonathan. Nice looking... 07-04-19, 10:38

PaperClip

Jonathan Moore Evening, A few more... 07-04-19, 19:37

Mike Cecil Jonathon, As I said, just... 08-04-19, 16:53

karlos59 Looking good Jonathan keep up... 09-04-19, 05:42

PaperClip

Jonathan Moore Morning All, Somewhere in... 12-04-19, 11:14

PaperClip

Jonathan Moore A few more. 12-04-19, 11:17

PaperClip

Jonathan Moore The original cooling unit... 12-04-19, 11:20

PaperClip

Jonathan Moore I have been dealing with a... 12-04-19, 11:22

PaperClip

Jonathan Moore Evening All, The cooling... 14-04-19, 09:55

PaperClip

Jonathan Moore Next on the list was the... 14-04-19, 10:01

PaperClip

Jonathan Moore I haven't got any of the... 14-04-19, 10:06

PaperClip

Jonathan Moore Then on to the exhaust pipe.... 14-04-19, 10:10

PaperClip

Jonathan Moore Evening All, The two into... 19-04-19, 22:16

PaperClip

Jonathan Moore To complete the exhaust I... 19-04-19, 23:19

PaperClip

Jonathan Moore I have been having problems... 19-04-19, 23:31

PaperClip

Jonathan Moore two more pictures. 19-04-19, 23:34

PaperClip

Jonathan Moore On the original tank, where... 19-04-19, 23:39

PaperClip

Jonathan Moore And more pictures. 19-04-19, 23:43

PaperClip

Jonathan Moore Over the silencer there... 19-04-19, 23:48

James P This is a awesome thread 20-04-19, 00:11

jdmcm Jonathan I would like to... 20-04-19, 02:16

karlos59 Coming along nicely Jonathan 20-04-19, 07:04

Jonathan Moore Thank you for your encourage.... 20-04-19, 16:20

PaperClip

Jonathan Moore Morning, The petrol tanks... 24-05-19, 09:42

PaperClip

Jonathan Moore The top cover for the outer... 24-05-19, 09:47

PaperClip

Jonathan Moore looking a bit like a vacuum... 24-05-19, 09:52

PaperClip

Jonathan Moore There's not alot to show you... 24-05-19, 09:56

PaperClip

Jonathan Moore Morning All, This is a... 24-05-19, 10:05

Ganmain Tony Mein gott!! 24-05-19, 13:17

Jonathan Moore The trouble is Tony, a ford... 24-05-19, 21:41

David Dunlop Are there any surviving... 24-05-19, 22:29

PaperClip

Jonathan Moore You are probably right David,... 02-06-19, 21:07

PaperClip

Jonathan Moore The next problem was bolting... 02-06-19, 21:12

Mike Cecil Engine specs? 02-06-19, 23:21

D Ellery Wow!!! What an awesome... 03-06-19, 06:36

Jonathan Moore Morning Mike and D, I am... 03-06-19, 09:26

Lynn Eades Hi D. The sickness lingers??? 03-06-19, 10:35

D Ellery Hi Lynn. Ha ha yes, iv'e not... 03-06-19, 10:48

PaperClip

Jonathan Moore Evening All, Today I... 03-06-19, 21:24

Mike Cecil Thank you 04-06-19, 04:25

David Dunlop Wow! Quite a range of welding... 04-06-19, 05:25

PaperClip

Jonathan Moore Evening All, Just a quick... 22-06-19, 21:59

PaperClip

Jonathan Moore Evening All, I have been... 22-06-19, 22:11

PaperClip

Jonathan Moore The final pictures are of the... 22-06-19, 22:16

D Ellery Hi Jonathon. Love the concept... 23-06-19, 04:50

karlos59 Looking good Jonathon do you... 23-06-19, 06:41

PaperClip

Jonathan Moore Evening All, After my... 02-09-19, 21:10

PaperClip

Jonathan Moore Evening All, For various... 14-09-19, 21:23

PaperClip

Jonathan Moore Evening All, I thought... 21-09-19, 21:06

PaperClip

Jonathan Moore ………..………………….. 21-09-19, 21:09

David Dunlop Nice to see more of the... 21-09-19, 21:27

PaperClip

Jonathan Moore Hi David, I am going to... 21-09-19, 23:12

David Dunlop A wild and crazy thought,... 22-09-19, 01:31

PaperClip

Tony Mathers Well done. This is a Pz I... 22-09-19, 06:24

PaperClip

Jonathan Moore David, Good theory but my... 22-09-19, 11:20

PaperClip

Tony Mathers If you wish I have a few... 22-09-19, 13:08

PaperClip

Jonathan Moore Thanks for the offer Tony ,I... 22-09-19, 18:24

PaperClip

Tony Mathers 109212 Same tank, but photo... 23-09-19, 13:51

PaperClip

Jonathan Moore Thanks Tony, lovely pictures.... 27-09-19, 20:47

PaperClip

Jonathan Moore I had a very informative and... 28-09-19, 18:55

PaperClip

Jonathan Moore Evening All, Things have... 13-10-19, 21:21

PaperClip

Jonathan Moore The clutch and brake pedals... 13-10-19, 21:25

PaperClip

Jonathan Moore Fake brake bands, obviously... 13-10-19, 21:35

PaperClip

Jonathan Moore Evening All, I have been... 13-10-19, 21:39

karlos59 Well done Jonathan its... 13-10-19, 23:12

PaperClip

Jonathan Moore Thanks Karlos. I managed... 15-10-19, 21:26

super dave You are doing a fantastic job... 16-10-19, 07:15

PaperClip

Jonathan Moore Evening All, I have done a... 17-10-19, 21:19

PaperClip

Jonathan Moore Evening All, This is the... 18-10-19, 21:14

PaperClip

Jonathan Moore Morning All, Someone on... 27-10-19, 11:23

PaperClip

Jonathan Moore For some reason I can never... 27-10-19, 11:46

PaperClip

Jonathan Moore The holding bracket for the... 27-10-19, 11:57

PaperClip

Jonathan Moore In the original tank between... 27-10-19, 12:15

PaperClip

Jonathan Moore Evening All, I have... 28-10-19, 21:10

PaperClip

Jonathan Moore Evening, I have achieved... 02-11-19, 21:43

Jonathan Moore This is a long shot I know... 02-11-19, 21:55

PaperClip

Jonathan Moore Afternoon All, This is... 24-12-19, 14:19

PaperClip

Jonathan Moore The next job was the petrol... 24-12-19, 14:24

PaperClip

Jonathan Moore I decided that I wanted to... 24-12-19, 14:31

PaperClip

Jonathan Moore The throttle needed... 24-12-19, 14:35

PaperClip

Jonathan Moore I have installed a battery... 24-12-19, 14:41

PaperClip

Jonathan Moore The wiring duct from the... 24-12-19, 15:26

PaperClip

Jonathan Moore Recently I have been... 24-12-19, 15:33

PaperClip

Jonathan Moore I posted a question on... 24-12-19, 15:39

PaperClip

Jonathan Moore The work light sockets I had... 24-12-19, 15:46

PaperClip

Jonathan Moore The sockets are standard DIN... 24-12-19, 16:01

PaperClip

Jonathan Moore A member of the another forum... 24-12-19, 16:06

Mike Cecil Magnificent! 24-12-19, 17:15

James P The steckdose is still... 24-12-19, 17:17

PaperClip

Jonathan Moore Afternoon James, I had... 26-12-19, 14:30

PaperClip

Jonathan Moore Evening All, The gear... 07-01-20, 20:53

PaperClip

Jonathan Moore The next question was what to... 07-01-20, 20:56

PaperClip

Jonathan Moore I think the knob would have... 07-01-20, 21:03

PaperClip

Jonathan Moore Evening All, I have been... 20-02-20, 20:48

PaperClip

Jonathan Moore A few more. 20-02-20, 21:00

PaperClip

Jonathan Moore I have been putting off... 20-02-20, 21:05

PaperClip

Jonathan Moore It took a lot of welding and... 20-02-20, 21:08

PaperClip

Jonathan Moore The original cover was a one... 20-02-20, 21:13

PaperClip

Jonathan Moore The driveshaft cover from the... 20-02-20, 21:19

PaperClip

Jonathan Moore The storage plan for a panzer... 20-02-20, 21:25

PaperClip

Jonathan Moore a few more. 20-02-20, 21:31

PaperClip

Jonathan Moore I spent a couple of hours... 20-02-20, 21:34

PaperClip

Jonathan Moore Looking forward a bit I need... 20-02-20, 21:43

PaperClip

Jonathan Moore This is the kit of parts for... 20-02-20, 21:48

PaperClip

Jonathan Moore The hub is the placed over... 20-02-20, 21:53

PaperClip

Jonathan Moore Jubilees clips, top and... 20-02-20, 21:58

Chris Abraham Great work you are doing. I... 20-02-20, 23:18

Jonathan Moore Morning Chris, Have you got... 21-02-20, 10:35

PaperClip

Chris Abraham Hi Jon, i have got the P.M... 21-02-20, 11:42

Tony Smith Have you given any thought to... 21-02-20, 02:07

Jonathan Moore Morning Toni, Thanks for... 21-02-20, 10:43

PaperClip

Tony Smith Like the cleats on steel... 21-02-20, 11:05

PaperClip

Jonathan Moore Tony, A question that I... 21-02-20, 20:13

PaperClip

Jonathan Moore As the steering box is from a... 21-02-20, 20:18

PaperClip

Jonathan Moore I decided to add some detail... 21-02-20, 20:23

PaperClip

Jonathan Moore The locking mechanism for the... 21-02-20, 20:33

PaperClip

Jonathan Moore My version. On the top of the... 21-02-20, 20:38

PaperClip

Jonathan Moore On the inside of the hull... 21-02-20, 20:41

PaperClip

Jonathan Moore On the front of the hull... 21-02-20, 20:45

PaperClip

Jonathan Moore I know that they are not the... 21-02-20, 20:49

Mike Moran When I worked in a... 21-02-20, 23:05

Jonathan Moore Good point Mike, I will check... 22-02-20, 10:24

Chris Abraham Its a phosphate finish its... 22-02-20, 14:33

PaperClip

Jonathan Moore Thanks Chris. :thup2: ... 22-02-20, 18:14

PaperClip

Jonathan Moore Evening All, ... 29-02-20, 19:04

PaperClip

Jonathan Moore It can fit in two positions... 29-02-20, 19:11

David Dunlop Hi Jon. Wow! Snug! I guess... 29-02-20, 20:14

PaperClip

Jonathan Moore Evening David, If you... 29-02-20, 21:39

PaperClip

Jonathan Moore The escape hatch is marked in... 29-02-20, 21:49

RichardT10829 Absolute exquisite work ! 17-03-20, 11:16

PaperClip

Jonathan Moore Thanks Richard. :thup: ... 18-03-20, 16:07

PaperClip

Jonathan Moore The Gurtsacs were stored in... 18-03-20, 16:12

PaperClip

Jonathan Moore Bolted to the upper left hand... 18-03-20, 16:20

PaperClip

Jonathan Moore Two more...…….. 18-03-20, 16:22

PaperClip

Jonathan Moore I am trying to finish all the... 18-03-20, 16:39

PaperClip

Jonathan Moore And my attempt. 18-03-20, 16:47

PaperClip

Jonathan Moore I am feeling a bit crappy so... 18-03-20, 16:52

PaperClip

Jonathan Moore Well, I finally got my arse... 18-03-20, 17:01

Petr Brezina Top class work, Jonathan.... 18-03-20, 17:31

Jonathan Moore Don't worry Petr, there's... 19-03-20, 12:24

PaperClip

Jonathan Moore Evening All, I hope that... 26-03-20, 20:20

PaperClip

Jonathan Moore Evening All, A week of... 30-03-20, 20:07

PaperClip

Jonathan Moore more pictures 30-03-20, 20:10

PaperClip

Jonathan Moore Pictures showing how the... 30-03-20, 20:15

Bob Carriere Wild suggestions...... 30-03-20, 20:29

Lynn Eades Jon, can you explain how you... 31-03-20, 00:15

PaperClip

Jonathan Moore I am confused and if I caused... 31-03-20, 12:06

Mike Cecil From Bob's post .... ... 31-03-20, 16:26

PaperClip

Jonathan Moore Evening Mike, It's no... 31-03-20, 19:03

PaperClip

Jonathan Moore Thanks Bob, I think that I am... 01-04-20, 21:11

PaperClip

Jonathan Moore The 7 larger holes are there... 01-04-20, 21:16

David Dunlop Is there much off gassing... 01-04-20, 21:29

Jonathan Moore Evening David, The two... 01-04-20, 21:59

PaperClip

Jonathan Moore Evening, And the results... 02-04-20, 19:31

PaperClip

Jonathan Moore You can see in this picture... 02-04-20, 19:33

David Dunlop Jon. I can hardly wait to... 03-04-20, 00:42

Jonathan Moore Morning David, It's... 03-04-20, 10:16

Grant Bowker This isn't strictly relevant,... 03-04-20, 12:44

PaperClip

Jonathan Moore Evening, I thought that... 03-04-20, 19:04

PaperClip

Jonathan Moore Evening All, In truth... 23-04-20, 20:30

Jonathan Moore Today, was the day, when it... 23-04-20, 20:31

David Dunlop Awesome, Jon! You must be... 23-04-20, 22:31

Bob Carriere Jon....what did you do to... 23-04-20, 22:57

Jonathan Moore I am David, I now have to... 24-04-20, 10:05

Tim Bell Do you have a picture of the... 24-04-20, 11:18

PaperClip

Jonathan Moore Morning Tim, This is the... 25-04-20, 10:35

PaperClip

Jonathan Moore Evening All, I have... 03-05-20, 19:33

PaperClip

Jonathan Moore It took ages to find a horn... 03-05-20, 19:37

PaperClip

Jonathan Moore Evening All, All of a... 06-05-20, 20:05

Petr Brezina What a cute little vehicle! ... 24-04-20, 11:19

PaperClip

Jonathan Moore Afternoon, The first road... 10-05-20, 16:58

David Dunlop Looking good, Jon. Any... 10-05-20, 17:18

Jonathan Moore Evening David, They weigh... 10-05-20, 21:45

jack neville Jonathan what is the resin... 11-05-20, 01:35

Jonathan Moore Morning Jack, It's a high... 11-05-20, 11:02

karlos59 Looking great Jonathan making... 12-05-20, 01:34

Tim Bell Soon he will have the perfect... 12-05-20, 11:29

PaperClip

Jonathan Moore Super market queues Tim, what... 20-05-20, 19:31

PaperClip

Jonathan Moore Someone asked me how I had... 20-05-20, 19:34

Jon Bradshaw Turret 20-05-20, 23:54

Jonathan Moore Thanks Jon, that's an... 21-05-20, 10:41

PaperClip

Jonathan Moore Good Morning All, The... 31-05-20, 10:31

PaperClip

Jonathan Moore Most of the rear engine deck... 31-05-20, 10:35

PaperClip

Jonathan Moore This cover also houses the... 31-05-20, 10:41

PaperClip

Jonathan Moore The cover to the right covers... 31-05-20, 10:46

Ganmain Tony Thanks Jonathon 31-05-20, 11:19

karlos59 Tony as usual brilliant work... 31-05-20, 22:30

PaperClip

Jonathan Moore Evening all, Thanks again... 06-06-20, 19:45

David Dunlop Looks like those racing... 06-06-20, 23:24

PaperClip

Jonathan Moore Hello David, sorry for not... 07-07-20, 21:36

PaperClip

Jonathan Moore Around the opening of this... 07-07-20, 21:40

PaperClip

Jonathan Moore Next to the radio operators... 07-07-20, 21:45

PaperClip

Jonathan Moore When I made the radiator... 07-07-20, 21:51

PaperClip

Jonathan Moore The radio aerial on the... 07-07-20, 21:55

PaperClip

Jonathan Moore The radio mast was attached... 07-07-20, 22:01

Mike Gurr Jon, Never apologise for... 08-07-20, 17:18

PaperClip

Jonathan Moore :thup2: thanks Mike it's nice... 10-07-20, 21:22

PaperClip

Jonathan Moore I had thought that they would... 10-07-20, 21:24

PaperClip

Jonathan Moore Evening All, One thing... 22-07-20, 19:26

PaperClip

Jonathan Moore Most of the original blocks... 22-07-20, 19:28

PaperClip

Jonathan Moore I decided to use a new fire... 22-07-20, 19:29

PaperClip

Jonathan Moore The two other items that I... 22-07-20, 19:32

PaperClip

Jonathan Moore Evening all, Not much to... 29-09-20, 20:45

PaperClip

Jonathan Moore The copper is 35mm plumbing... 29-09-20, 20:51

PaperClip

Jonathan Moore That's all for now. ... 29-09-20, 20:57

Ganmain Tony Update 01-10-20, 13:01

DaveBuckle Agreed 02-10-20, 11:16

PaperClip

Jonathan Moore Evening All, I have... 23-11-20, 20:31

PaperClip

Jonathan Moore As stated before, I am going... 23-11-20, 20:37

PaperClip

Jonathan Moore It's taken me some time but i... 23-11-20, 20:44

PaperClip

Jonathan Moore It Took me most of Saturday... 23-11-20, 20:59

PaperClip

Jonathan Moore The next job is to connect ... 23-11-20, 21:01

PaperClip

Jonathan Moore Evening All, Forward, ever... 29-11-20, 20:35

PaperClip

Jonathan Moore The support is bent in this... 29-11-20, 20:39

Jonathan Moore And my wife has instructed me... 29-11-20, 20:40

Tony Smith Is there nothing you can't... 30-11-20, 03:36

PaperClip

Jonathan Moore Evening Tony, I can think... 07-01-21, 19:30

PaperClip

Jonathan Moore The original unit rotates the... 07-01-21, 19:34

PaperClip

Jonathan Moore Evening All, Things are... 22-01-21, 21:13

PaperClip

Jonathan Moore The gear box now has it's... 22-01-21, 21:18

PaperClip

Jonathan Moore Evening All, At last I... 20-02-21, 21:35

PaperClip

Jonathan Moore While*I was in the process*of... 20-02-21, 21:42

PaperClip

Jonathan Moore Evening All, Continuing... 28-02-21, 20:21

PaperClip

Jonathan Moore A quick grind with a burr and... 28-02-21, 20:26

PaperClip

Jonathan Moore In the pictures I have just... 28-02-21, 20:30

PaperClip

Jonathan Moore Evening All, I had a... 03-03-21, 20:44

PaperClip

Jonathan Moore The two pictures show what... 03-03-21, 20:46

super dave All I can say is wow, Keep up... 04-03-21, 06:44

James P When it comes time to stamp a... 04-03-21, 22:15

Jonathan Moore When it comes time to stamp a... 05-03-21, 10:06

Ed Storey Stampings 05-03-21, 12:05

Jonathan Moore Unlike some, I have no... 05-03-21, 20:10

Mike Cecil To mark or not to mark ...... 05-03-21, 20:31

Bruce Parker (RIP) Now wouldn't it be... 05-03-21, 21:51

karlos59 Amazing work as usual keep it... 06-03-21, 04:38

Ganmain Tony Interesting 06-03-21, 07:03

Ed Storey Armour Dreams 06-03-21, 12:43

PaperClip

Jonathan Moore It seems strange that we are... 06-03-21, 20:53

PaperClip

Jonathan Moore "Braking News" The spelling... 06-03-21, 21:03

PaperClip

Jonathan Moore Evening All, Last night I... 07-03-21, 19:39

Petr Brezina Jonathan, your engineering... 08-03-21, 08:54

Tim Bell Indeed... if he had been... 09-03-21, 12:06

PaperClip

Jonathan Moore Sometimes I wonder if we did?... 10-03-21, 21:00

PaperClip

Jonathan Moore Evening All, I had quite... 14-03-21, 20:20

PaperClip

Jonathan Moore The other item was the cover... 14-03-21, 20:22

DaveBuckle Wait a minute ... 21-03-21, 06:39

PaperClip

Jonathan Moore Evening Dave, I don't know... 21-03-21, 22:11

Kirk Armitage New toy...Colchester 22-03-21, 08:18

Jonathan Moore Evening Kirk, It's a... 22-03-21, 21:12

David Dunlop Jonathan! Increased... 23-03-21, 15:04

Jonathan Moore Morning David, Sorry I... 03-04-21, 10:27

PaperClip

Jonathan Moore Evening All, I have been... 04-04-21, 21:05

PaperClip

Jonathan Moore I ran a single wire just to... 04-04-21, 21:10

PaperClip

Jonathan Moore The last item for now, is a... 04-04-21, 21:13

PaperClip

Jonathan Moore Evening all, Well, I have... 05-04-21, 20:08

PaperClip

Jonathan Moore The second item is a strange... 05-04-21, 20:11

Mike Cecil Well done. 06-04-21, 03:25

PaperClip

Jonathan Moore Thanks Mike I have enjoyed... 16-05-21, 17:37

PaperClip

Jonathan Moore To the right, is a lock which... 16-05-21, 17:39

PaperClip

Jonathan Moore To the left, is the lever for... 16-05-21, 17:41

PaperClip

Jonathan Moore The third method of seeing... 16-05-21, 17:45

PaperClip

Jonathan Moore And that's all, until next... 16-05-21, 17:46

David Dunlop Fascinating work as always,... 16-05-21, 19:02

Jonathan Moore Evening David, Just the... 16-05-21, 19:44

PaperClip

Jonathan Moore Evening all, I had a very... 06-07-21, 20:06

PaperClip

Jonathan Moore Basically there's a main... 06-07-21, 20:23

PaperClip

Jonathan Moore Attached to the front cover... 06-07-21, 20:38

maple_leaf_eh You're not the first guy to... 07-07-21, 04:01

Darrell Zinck Hi Jonathan What's become... 11-03-22, 16:28

Niels V https://hmvf.co.uk/topic/35947... 11-03-22, 21:16

Darrell Zinck Hi Niels Thank you for... 12-03-22, 14:10

David Dunlop Two different surnames??? ... 12-03-22, 14:58

PaperClip

Jonathan Moore Evening All, Remember me,... 23-10-22, 20:41

PaperClip

Jonathan Moore Because of the limitation on... 23-10-22, 20:44

PaperClip

Jonathan Moore If we go back to my last... 23-10-22, 20:51

PaperClip

Jonathan Moore On the Tubes there is a... 23-10-22, 21:09

PaperClip

Jonathan Moore As you can see the unit... 23-10-22, 21:11

PaperClip

Jonathan Moore The next job is to get the... 23-10-22, 21:14

PaperClip

Jonathan Moore Rotation will be via my arm... 23-10-22, 21:17

PaperClip

Jonathan Moore The machining of the sprocket... 23-10-22, 21:21

PaperClip

Jonathan Moore I have been drilling flipping... 23-10-22, 21:25

PaperClip

Jonathan Moore All the holes have now been... 23-10-22, 21:31

PaperClip

Jonathan Moore First side finished. 23-10-22, 21:35

PaperClip

Jonathan Moore The tack welds now had to be... 23-10-22, 21:38

PaperClip

Jonathan Moore I now have two completed... 23-10-22, 21:43

PaperClip

Jonathan Moore I was going to make a sort of... 23-10-22, 21:45

PaperClip

Jonathan Moore And after a bit of welding.... 23-10-22, 21:48

David Dunlop Thanks for the great update,... 23-10-22, 22:21

Petr Brezina Excellent craftsmanship! ... 24-10-22, 16:21

PaperClip

Jonathan Moore Thanks both but I am just... 24-10-22, 20:21

PaperClip

Jonathan Moore I found time this evening to... 24-10-22, 20:23

PaperClip

Jonathan Moore The only item that I am... 24-10-22, 20:27

PaperClip

Jonathan Moore Only me, I just thought that... 24-10-22, 20:33

PaperClip

Jonathan Moore Then the final fabrication,... 24-10-22, 20:39

PaperClip

Jonathan Moore so I wanted something that... 24-10-22, 20:44

PaperClip

Jonathan Moore I have been keeping my eyes... 24-10-22, 20:45

PaperClip

Jonathan Moore Well I have stripped the hull... 24-10-22, 21:01

PaperClip

Jonathan Moore All nicely painted, in day... 24-10-22, 21:03

PaperClip

Jonathan Moore As I look at all the parts in... 24-10-22, 21:07

ChaseR83 Your build is simply amazing.... 25-10-22, 06:54

PaperClip

Tim Bell Research wise, no doubt... 25-10-22, 16:59

Jonathan Moore Tim, I have to ask where did... 25-10-22, 20:33

ChaseR83 I too, would love to know if... 26-10-22, 06:30

ChaseR83 Jon, Thank you for the... 26-10-22, 07:06

Tim Bell Jon Found them with an... 26-10-22, 11:31

Jonathan Moore Tim, I would definitely be... 26-10-22, 13:00

ChaseR83 PM Sent :thup2: 27-10-22, 05:01

ChaseR83 I would be willing to... 27-10-22, 05:06

PaperClip

Jonathan Moore Evening All, Today I... 30-10-22, 21:47

Ganmain Tony Simply... Marvellous 31-10-22, 10:41

Dave Newcomb Stateside equipment for... 31-10-22, 18:36

Jonathan Moore Thanks Tony and Dave, I... 31-10-22, 20:59

ChaseR83 Jon, Have you... 01-11-22, 03:55

James P BMD 3 track 01-11-22, 16:05

PaperClip

Jonathan Moore Evening all, Time for... 06-11-22, 18:52

maple_leaf_eh Contact the Kevin Wheatcroft... 07-11-22, 01:16

Jonathan Moore Evening Terry, As they... 07-11-22, 20:38

David Dunlop Jonathan. Do you have any... 08-11-22, 04:33

PaperClip

Jonathan Moore Evening David, Pictures... 08-11-22, 19:45

Lynn Eades Apart from the pitch, it... 11-11-22, 10:14

Jonathan Moore You are nearly correct, well... 11-11-22, 19:43

Harry Moon consider new tracks 12-11-22, 02:44

David Dunlop Morning, Jon. I am not... 12-11-22, 05:39

PaperClip

Jonathan Moore Evening David, I have looked... 13-11-22, 19:29

Tony Mathers Tracks 15-01-23, 07:06

PaperClip

Tony Mathers Pz I track 15-01-23, 10:19

David Herbert I suspect that Pz1 track is... 15-01-23, 14:11

Ganmain Tony Track difference 17-01-23, 01:56

Jonathan Moore Evening All, The Panzer is... 17-01-23, 19:31

PaperClip

Jonathan Moore Evening all, it's only little... 12-02-23, 19:10

PaperClip

Jonathan Moore One part that I hadn't made,... 12-02-23, 19:14

PaperClip

Jonathan Moore I wanted to put a stop tap... 12-02-23, 19:18

PaperClip

Jonathan Moore some extra pictures. 12-02-23, 19:23

Bob Carriere Hibernation....? You have... 13-02-23, 04:37

Philliphastings There really are no words to... 15-02-23, 11:06

PaperClip

Jonathan Moore Bob, I am trying to... 15-03-23, 21:50

PaperClip

Jonathan Moore I have made some instruction... 15-03-23, 21:56

Tim Bell You make it sound so easy...... 16-03-23, 12:32

PaperClip

Jonathan Moore It seems that the job of... 19-03-23, 21:30

PaperClip

Jonathan Moore The radiator is in place and... 19-03-23, 21:39

PaperClip

Jonathan Moore The exhaust and rear light... 19-03-23, 21:44

PaperClip

Jonathan Moore Lastly, I decided that where... 19-03-23, 21:45

Ganmain Tony Oh.. wow! 20-03-23, 09:14

PaperClip

Jonathan Moore Evening All, I have been... 28-03-23, 21:30

PaperClip

Jonathan Moore I have used a different... 28-03-23, 21:33

PaperClip

Jonathan Moore And the finished item. Jon 28-03-23, 21:36

Philliphastings Top 3 29-03-23, 13:15

PaperClip

Jonathan Moore I can't believe how long it... 22-06-24, 10:45

PaperClip

Jonathan Moore The turrets on and I have... 22-06-24, 10:59

PaperClip

Jonathan Moore I have looked at several... 22-06-24, 11:04

PaperClip

Jonathan Moore More pictures 22-06-24, 11:06

David Dunlop Nice to have you back posting... 22-06-24, 15:16

Bob Carriere Wow....220 ++++ 22-06-24, 21:44

Jonathan Moore Morning, To be honest... 23-06-24, 10:32

David Dunlop Jonathan. As luck would... 23-06-24, 13:45

David Dunlop I found it, Jonathan. It... 23-06-24, 17:18

PaperClip

Jonathan Moore Recently I have been getting... 23-06-24, 20:55

PaperClip

Jonathan Moore The radios are of course just... 23-06-24, 20:57

PaperClip

Jonathan Moore Saturday was supposed to be... 23-06-24, 21:07

PaperClip

Jonathan Moore A few more 23-06-24, 21:10

PaperClip

Jonathan Moore Last one. Jon 23-06-24, 21:11

Petr Brezina Outstanding work Jonathan ... 24-06-24, 10:59

Chris Preston Armour Dreams..... 25-06-24, 23:45

Philliphastings Incredible 01-07-24, 03:25

PaperClip

Jonathan Moore Evening All, The weathers... 01-07-24, 21:00

r.morrison Welcome Back.... 02-07-24, 04:14

Tim Bell What unit are you... 02-07-24, 12:30

PaperClip

Jonathan Moore Thanks Robert, I am never far... 02-07-24, 20:31

maple_leaf_eh Happiness is parts going back... 02-07-24, 21:23

PaperClip

Jonathan Moore Evening All, Thanks for... 12-07-24, 21:28

PaperClip

Jonathan Moore Once fitted they cover the... 12-07-24, 21:30

Tim Bell I have some of David Doyle's... 16-07-24, 19:00

Jonathan Moore For my sins I have been... 16-07-24, 20:39

Ed Storey Amazing Work 16-07-24, 21:14

Jonathan Moore Thanks ED, I am glad that you... 17-07-24, 17:53

Hanno Spoelstra Hello Jon, I am in awe of... 13-10-24, 20:46

PaperClip

Jonathan Moore Chase, sorry for such a late... 27-10-24, 20:16

PaperClip

Jonathan Moore Last one, for some reason I... 27-10-24, 20:19

David Dunlop Almost looks like a war... 27-10-24, 20:26

PaperClip

ChaseR83 Jon did you ever get any... 12-10-24, 22:09

Prev

Previous Post

Next Post

Next

#11

Old

22-02-20, 14:33

Chris Abraham Chris Abraham is offline

Chris Abraham is offline

Registered User

Join Date: Feb 2020

Location: England

Posts: 26

Default

Its a phosphate finish its what they use in the gun trade to parkerize weapons or tools and spanners, its also used in the paint trade so you don't have to use a chemical primer. The phosphate process gives the surface a microscopic pourus finish so either oil or paint will soak into the surface, the same applies to using the chemical you are using. Its a simple process just boil up the solution, dip your blasted metal part, wash off, dry with a hot air gun and you are ready to paint, oil etc.

Reply With Quote

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Armour in the Rhineland	John McGillivray	The Armour Forum	1	05-11-11 20:04
Armour id needed	BSHEVLIN	The Armour Forum	2	18-06-09 05:21
Old Armour in service	matilda IIA	The Armour Forum	19	11-03-09 12:11
Armour i.d.	David_Hayward (RIP)	The Armour Forum	8	14-09-07 11:27
Tim Tam Ice Creams!!	David_Hayward (RIP)	The Sergeants' Mess	2	23-09-05 04:08

All times are GMT +2. The time now is 11:56.