Ford Crankshaft pulley needed.

[Paul Singleton]

Peter Duggan has the same set up on his Lynx. Send him a message.

[Andrew Rowe]

Harry , the box you show at the front is for shielded ignition, to stop static interference for the use of the radio set, typically the No.19 set. The leads are of the braided type to the plugs. Also see picture of the two types of crank pulleys for the different model Lynx's., Cheers Andrew.

[Harry Moon]

Originally Posted by Andrew Rowe

Harry , the box you show at the front is for shielded ignition, to stop static interference for the use of the radio set, typically the No.19 set. The leads are of the braided type to the plugs. Also see picture of the two types of crank pulleys for the different model Lynx's., Cheers Andrew.

Definitly the one on the right! But I can see the advantage of the double pulley.

[Harry Moon]

Thank You.

[Lynn Eades]

As the Windsor carrier would have the fan extension with double pulley it will need the double lower pulley. The lynx with the single pulley must have had a different upper set up and single pulley water pumps.