Ford Cab 13 ATT info requested

[rob love]

Very possible, although without the backs. The manual lists 4 seats for the ATT, the cable layer, and 2 for the personnel carrier. But it only lists the 2 backs for the personnel carrier. I would guess that the seats on the wheel wells for the first two have back cushions (the manual lists two different cushions) and the two at the very front of the personnel carrier also have seat backs. There are 4 cushions listed for personnel carrier that would likely be for the seats on the wheel wells for that vehicle.

While the single seat assembly in the Personnel carrier look like the traditional cab seats, I note the rear cushions are a lot smaller. So thank you for the link, it looks like I will need 4 of the seats shown as the single seat assembly and mount them on the wheelwells.

[Tony Smith]

Originally Posted by rob love

So thank you for the link, it looks like I will need 4 of the seats shown as the single seat assembly and mount them on the wheelwells.

Is this two?

http://www.mapleleafup.net/forums/sh...ad.php?t=32962

[rob love]

Those would likely be the two that go on the floor forward of the two wheel wells. They would appear to be correct for the personnel body shown in the picture in my post, but not in the ATT. I suspect there will be stowage bins in those spots.