![]() |
|
#1
|
||||
|
||||
![]()
60MPH in a 12 cab CMP. Not the most intelligent choice, but back in the day that’s what she could do.. Was it safe? Foolhardy? Probably
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1943 Converto Airborne Trailer 1983 M1009 CUCV 1957 Triumph TRW 500cc RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers |
#2
|
|||
|
|||
![]()
in 2005 coming home on our first big freedom convoy I had on a set of 1100x20 on my C15A, we hit about 65 mph when we just had to pull out and pass an LSVW. Only time I ran the big tires on the C15A.
I regularly cruise at 50 mph (gps confirmed) in my C60L with 1100x20's with the 235 with Fentons. |
#3
|
|||
|
|||
![]()
Canada's Fighting Vehicles lists maximum speeds between 40 and 50 MPH. The maximums do vary within the same basic model (eg. C60) which I assume may be due to weight as to the best of my knowledge all C60 had the same power, gearing and tires.
|
#4
|
|||
|
|||
![]() Quote:
Way more useable RPM with the 235 and a few MPH from the 1100 tires. |
#5
|
||||
|
||||
![]()
Very usable info, will digest and get back on this subject later
![]()
__________________
Regards, Hanno -------------------------- |
#6
|
|||
|
|||
![]()
Here is a simple 60mph chart Easy to figure out revs at any speed eg for 40mph just do the 4/6 calculation, for 55 do 5.5/6 and 35 do 3.5/6 etc.
When measuring the tire height do it from the ground to centre of the axle and double. This is your true radius and diameter. Last edited by Lang; 28-12-23 at 23:35. |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
My truck | diegoarielb | The Restoration Forum | 10 | 02-05-14 23:47 |
I got me a new Truck! | Howard | The Softskin Forum | 11 | 05-05-08 14:36 |
New truck | Pete Ashby | The Softskin Forum | 5 | 10-08-06 22:53 |
Truck ID Please | Bill Murray | The Softskin Forum | 37 | 31-07-05 18:41 |
COE truck ID | nuyt | The Softskin Forum | 9 | 13-06-04 23:07 |