CMP 3G1 Ambulance body parts needed.

[derk derin]

I just went outside to the Ambulance box and at first glance it has a Silver paint job inside but looking closer underneath the silver paint you can see there is white paint. From there it is the thin Red pressboard that the interior is sheeted with. So I would say the interior was originally white from the factory. At some point my box was painted silver, both inside and outside so somebody wanted to give it a new paint job to clean it up!
The inside of the doors are painted the same green colour as the outside of the vehicle. The doors when swung all the way open could be secured by a lower latch on the bottom of the ambulance body and held to the side of the body.

[derk derin]

As for the different interior layouts of the bodies according to my manuals the ambulance body styles 3F1 and 3G1 had the blanket locker with water tank on top at the Left of the front of the body with the attendants seat on the right side up front.

[derk derin]

The Ambulance body 3G2 had the exterior water heater mounted to the right side of the body so they reversed the layout so the water tank was on the right front corner of the box.

[derk derin]

The 3G2 model Ambulance box.

[derk derin]

The 3G1 ambulance had a recirculator, (whatever that is?)
I see in the picture that the water tank is square. That may have a special water system?

[derk derin]

And one more Ambulance body manual I have is a Tropic-Proofed Ambulance body Model 3G5

[Alex van de Wetering]

Derk,

Thanks for clarifying the different interior layouts! Very interesting stuff.

Attached are 3 pictures of the Ambulance Hanno and I viewed; It has 576 miles on the clock and as far as I know it's still for sale.