2-pounder recoil cylinder dimensions?

[Ron Pier]

front view

[Jakko Westerbeke]

Thanks, that would be great Oh, and I forgot to mention: the length of the rails that the barrel rides in would be nice too

Here’s a quick sketch of the dimensions I’m after:

2-ponder dimensions.png

[Ron Pier]

I'll print your diagram off

[Graeme Stephens]

Hello Jakko, hopefully these pics and dimensions might help.
# Total length in metric 1100 mm, = tube 1050 + cone 50 ~
# Tube 110 mm diameter
# Rail 850 long from end, 110 wide, with +50 mm sides
# First band 150 mm from end, then 130 space, then 2nd band 130 mm wide
I don't have yet the cone/bolt protrusion.
Cheers

[Ron Pier]

I'll stand down now. Ron

[Jakko Westerbeke]

Thank you both! This should give me enough information to scratchbuild something that looks like the real thing, and get the BARV model finished

[Jakko Westerbeke]

I thought I’d show you what I built based on Graeme’s measurements:

IMG_1409.jpeg

IMG_1410.jpeg

It’s not perfect, but it will look good enough under the BARV’s catwalk.

Now I just need to wait for the glue to dry so I can paint it and stick it onto the model