Transfer case surgery....

[Phil Waterman]

Bob- What was the condition of the other bearings in the transfer case? Strangely it was the center cluster bearings on my transfer case that had to be replaced.

Just used a speedy sleeve to stop an oil leak on Beauty transfer case. New seal and speedy sleeve and leak was gone.

Also just replace one of the orginal universal joints on Beauty, finially developed end slop on one of the cross Xs. Not to bad though it last 10,000 miles after being cleaned and reassembled during the restoration.

On the Pattern 12 I think I will just go ahead and replace all the universals before reassembling.