|
|
#16
21-03-06, 16:02
|
||||
|
||||
Jordan, the first cmp tanks I did myself. I simply cut the bottoms out with a zip cut disc, had them sandblasted inside and out, then welded the bottoms back in. The interior was full of loose crud but amazingly they did not have any pinholes as I did not even have to coat them. I tested them by filling them up with water and let them sit on some paper to see if they leaked. I even put a rubber bung in with a couple pounds of air and they were good to go. Afterwards I simply dumped the water and used an airline to dry them out. Cost was next to nothing.
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1943 Converto Airborne Trailer 1983 M1009 CUCV 1957 Triumph TRW 500cc RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode