Have "Bofors" will travel

[Keith Orpin]

Hi Rob,
As promised, details of the cab rear window plate. Overall dimension is 830mm X 280mm with a 30 degree radius on the corners. The hole in the middle measures 507mm in length and 190mm in height. Before you go cutting a hole in the middle of the plate, allow a turn over of 9mm on all edges, which is flatten down onto the inside edge so that you don't end up with a raw edge. The plate is then fitted to the outside of the cab using round headed screws and nuts on the inside. Turn buckles are then fitted to the inside edge of your now smaller rear window and the canvas attaches to them.
Details of the rear canvas windows to follow:
Keith