|
|
#4
02-10-07, 05:56
|
||||
|
||||
Max, here's the steering box. I have a cab 11 and five cab 13s here right now and they all use the same box. Three of them use that type rad mount too.
In that engine compartment picture the steering mount bolt holes are the rusty holes on the left in a piece of iron that's bolted to the side of the frame rail. The other set of holes in the top of the frame rail are where the box mounts on the Cab 11. This would seem to indicate that the Cab 11 and the Cab 13 frames are the same. This is a good thing since I have a good Cab 13 frame that I'd like to use on the Cab 11. The original on the Cab 11 has been severely butchered and lengthened too.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode