![]() |
|
#1
|
||||
|
||||
![]()
Seriously, Bob, if not sold by Corowa, let me know & I will take it home with me. (From Corowa, that is)
HH
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#2
|
||||
|
||||
![]() Quote:
![]()
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern |
#3
|
||||
|
||||
![]()
Hi Howard - Plushy has this on a rain check so it's up to him whether I hold it for him or move it on. Over to you James.
Re. the F15 & F60l, as Keefy says it's down to the plates, the f15 being only a two wheel drive doesn't require the transfer case data plate. Boobee - the instrument cluster looks to be the standard Chevrolet one in which case I have all the instrument and speedometer decals plus the scripted glass. With the speedometer face I would need to know whether it is a Dim Light or Bright Light face. The earlier ones, and I suspect Cab 12, would have been Dim Light, i.e. the headlight indicator light would have highlighted on low beam as opposed to the later standard of indicating high beam was on. Bob
__________________
Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com |
#4
|
||||
|
||||
![]()
No worries Bob, I'm not trying to cut in on Plushy, I won't need a dash for a few months yet. If plushy wants this one, I'll take the next one, no probs.
See you at Corowa! HH
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#5
|
||||
|
||||
![]()
As I said earlier - over to you James, but let me know ASAP as I can arrange for this to get to Corowa.
Bob
__________________
Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com |
#6
|
|||
|
|||
![]()
David....... thanks for the info on the screen door hooks. It makes sense to retro fit them to a cab 11...... if the cab 13 are hot I can imagine a cab 11 without the opening windscreen.....must be hell at low speed on a hot Summer day..... wearing a wool uniform to boot!!!
Dr. Bob..... will contact you by PM to exchange information and pictures on what I have and need. After seeing what Mike did on his with your help I might be tempted to try a home made job and save on shipping both ways the whole unit. They do become the focal point of well done cab......like a ring on a bride!!! BooBee
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#7
|
||||
|
||||
![]() Quote:
Re. your panel, you could certainly re-face the instruments and speedometer if they are still working. The odometer is another matter, that has to be stripped down to its individual reels if you were to replace the digits. As for the frame and bezel you would need to obtain the correct colours. Probably to that end it would be easier for me to provide you with a restored frame and bezel with a new scripted glass already fitted. Bob
__________________
Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com |
![]() |
Thread Tools | |
Display Modes | |
|
|