|
|
|
|
#1
11-02-09, 20:20
|
|||
|
|||
Chrysler multi-bank
I thought that this may be interesting.
Source http://collectionscanada.gc.ca/pam_a...940s&PageNum=1) Last edited by Paul Singleton; 12-01-20 at 15:32. 
|
|
#2
11-02-09, 21:41
|
|||
|
|||
Abortion..
Paul..
That multibank was quite the engine..five blocks incorporated into one..30 cylinders...five separate heads .. That beast had to have been conceived in the Officers mess late on a Friday night.. No mechanic that had to work on it would have designed an abortion like that... Only Chrysler...    
__________________
Alex Blair :remember :support :drunk:
|
|
#3
11-02-09, 22:10
|
||||
|
||||
|
Quote:
In 1989, I was in Arromanches on D-Day, there was a Sherman from our group there. A D-Day vet who served in REME walked up to look at it and saw it was fitted with a radial, he turned to us and said that the five bank Chrysler was by far the best. Always remembered that, because as odd an arrangement as it looks, it must have had some merits, this chap would have worked on them in battle conditions and would know which was best.
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor
|
|
#4
11-02-09, 23:01
|
|||
|
|||
|
Alex
Ive never seen one of those, but you'd have to admit that the war time Dodge motor was a pretty reliable unit. And ... if you think that was an abortion, you obviously haven't worked on British stuff like Ferrets, and their bevel boxes.How many per unit? How much room to work on any of it?
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#5
11-02-09, 23:24
|
||||
|
||||
|
Quote:
 If you want a challenge then try a Saladin or Saracen. 
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor
|
|
#6
12-02-09, 03:21
|
|||
|
|||
Multi Bank..
Quote:
If you ever get a chance to see a parts exploded break down of the engine,it is impressive.. I was referring to the concept of the design rather than the reliability...a cross between a radial and a inline..or a combination of the two..all the normal engine functions..to get them to work...so many questions...How did the engine oil system work??If the crank was in the center of the five blocks,which were cast into one block,and radiated out from the center,where did the oil go and how did it work../?pressure system??..//...Timing???..I could see fuel injection working on the engine but these were carbureted... I'll have to read up on the operation of the beast...but Dodge made good engines...  
__________________
Alex Blair :remember :support :drunk:
|
|
#7
12-02-09, 05:21
|
|||
|
|||
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
