LRDG Chevrolet Truck Fuse panel for No11 wireless set

[Charlie Down]

I have been researching details of the Long Range Desert Group and have come across an interesting photo with a detail I haven't seen before. The photo shows a Radio truck of T patrol in 1942. As you know these Chevrolet trucks were fitted with a No 11 wireless set for transmitting and receiving signals, and a civilian Phillips 635 radio receiver for the GMT time signal for accurate navigation using the stars. In the photo there is a black panel behind the drivers right elbow on the far right of the photograph. On the panel you can make out the word 'SET' which I believe in full would be 'Set No 11'. It looks like a fuse or power panel of some sort, most likely linked to the battery stowed on the running board on the RHS of the vehicle beside the driver. Having seen this photo I have found other photos showing a panel in the same area. Non radio trucks don't have this panel and I have been unable to find out any information about it.
What is it?
Is it a standard piece of kit or a panel made solely for the LRDG.
Are there any other photos and dimensions of this panel in use with any other vehicles?
It's a very intriguing photo and feature.

[Grant Bowker]

I don't have information about the specific panel you are asking about but wonder if it is possible that it is used to connect and control batteries, generators and wireless sets. A charging panel related to the 19 set is shown in this thread. http://www.mapleleafup.net/forums/sh...charging+panel
In some applications, the panels were not used in the vehicles but when the wireless was set up outside the vehicle.

[David Dunlop]

Hello Charlie.

I am leaning towards Grant’s line of thought at the moment on this panel.

Do any of the other photos of them you mentioned show large circular features around three inches in diameter, and standing out from the bases of the board? These are the switches on a charging board that control what batteries would be running the wireless set and what ones are on charge from the chorehorse.

David

[Ron Pier]

Here is the replica "Switchboard Charging No1" that I built for my Morris 8cwt. I was working with David Pope on this project before he died. His was for his Chevy 11 set, so I guess the Canadian trucks used this type too?? The item in your photo must be quite a bit smaller. Ron

[Charlie Down]

Thank you for the all replies and information.

The only other photo's only show enough to confirm that they also had these panels, but not any detail. I wasn't aware of its existence before so hadn't looked for evidence of it, but now I know what to look for it can be seen on other trucks. Its in a rather awkward position for being caught on camera, often obscured by stowage, crew and shadows.
I've email the Royal Signals Museum with the same information but they are shut due to Covid until next year.
So its most likely a charging panel (makes sense), but not a known version. Most likely had some of the same fittings re-arranged on a smaller panel to fit in the cramped location. It allowed the battery to be charged and the radio to be powered by the dedicated battery on the running board , or the truck battery (same voltage?), or isolated for transport?

[Charlie Down]

Photo of C5 Charging Panel. (From old MLU posting)
Was there a different Panel for No11 Wireless sets in 1942?
It looks to be the same size (dimensions would be really appreciated), but not the same layout.
I did at one point see if it had been mounted on its side, but it still doesn't match.
No chore horse was fitted on these trucks to my knowledge. Not enough room. I presume they would have used other Patrol trucks for charging in an emergency.
Although they would have been useful when on Road Watch for a week, with all the vehicles static under camouflage.