![]() |
|
#1
|
||||
|
||||
![]()
Sounds more like a Chev, but excellent all the same.
Thanks Keefy! HH
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#2
|
|||
|
|||
![]()
WORKING ON IT FOLKS, THE ARMY MUSEUM HAS TOLD ME OF ALL THE MODS THAT WERE DONE, MY PARTICULAR VEHICLE ONLY SERVED IN N.Z. AND WAS ADAPTED WITH THE TRAY ON IT ALTHOUGH IT AS IMPORTED AS AN ORIGINAL PORTEE , STILL BOWING TO THE GURUS BUT AT THE MOMENT STRUGGLING WITH SPLIT RIMS, HOPING TO HAVE THE ENGINE RUNNING NEXT WEEK, IT SEEMS OK. APPARENTLY MODIFIED ABOUT 1944-45 WE THINK . STILL HAVE THE ORIGINAL TRAY AS SEEN IN THE PHOTOS, MONEY DECIDES IF IT GOES BACK TO ORIGINAL WITH THE RAMPS ETC. AND ALL THE GRIEF THAT FOLLOWS.
ALL THE BEST MERRY XMAS TO YOU ALL ROOKIE
__________________
Eric Rooke |
#3
|
||||
|
||||
![]()
Howard I found some treasures, might help the F15 find top gear
|
#4
|
||||
|
||||
![]()
Hi Max - been in the tunnels again I see.
![]()
__________________
Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com |
#5
|
||||
|
||||
![]() Quote:
I may have to put a guard dog in there Max |
#6
|
||||
|
||||
![]() Quote:
![]() What I need Maxie is a pair of head gaskets & any advice on freeing stuck valves... What is the recommended head gasket material? Does anyone have a new part number? HH ![]()
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#7
|
||||
|
||||
![]() Quote:
![]()
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern |
#8
|
||||
|
||||
![]() Quote:
![]()
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#9
|
||||
|
||||
![]() Quote:
![]() As for your other question, gasket material - you know that white PVC used for wood glue? Alternately you could use gaffer tape. That'll stick to anything.
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern |
#10
|
||||
|
||||
![]()
what I done once was soak the valves with oil and then with all the plugs out had some one push the starter button while I taped the stuck valve down in time with the engine through the plug hole
first I made sure that the valves would move a little, they may not close up at first but I never give in. Other wise you gunna have to take the head off if they are stuck hard. Max |
#11
|
||||
|
||||
![]()
Cleaning out Dad's Shed, and look what i found!
(Was being used for storing gum boots) Says "TRUCK 3 TON, TIPPING, D^D" Am I correct this was for storage of canvass payload cover?
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#12
|
||||
|
||||
![]()
Oops, sorry about the orientation of the photo above!
Here's what is ahead of us!
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#13
|
||||
|
||||
![]() Quote:
![]() Nicely marked as well.
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern |
#14
|
||||
|
||||
![]()
Yes, I found a canvas tarp.
(But) It has been cut up & made into a cover for the boat... (Dammit) HH ![]()
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#15
|
||||
|
||||
![]()
Look what I found...
More shed cleaning today, IMG_2148.JPG About a dozen of these .303 boxes. Buy one from me at Corora IMG_2145.JPG This one will look better in my F15 than yours... IMG_2135.JPG Pick up this one at Corowa... IMG_2134.JPG IMG_2133.JPG ![]()
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) Last edited by Howard; 23-02-08 at 09:52. |
#16
|
||||
|
||||
![]()
Howard all i can see are red X`s
![]() |
#17
|
||||
|
||||
![]()
Hmmmm....
![]() They are OK on my computer.... Jiffy? Carmen? What have I done wrong? HH
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#18
|
||||
|
||||
![]()
... there's nothing wrong. I can see the pics too
![]()
__________________
Swiss Chris aka Christoph Zimmerli - Driving Switzerland's only Aussie F15 www.wheelsandtracks.com >> Condor A580 M+85691 (1952), Swiss Army Motorbike (unrestored) >> F15 1942 Aust (Cab 13) ::: restored by Keefy |
#19
|
||||
|
||||
![]() Quote:
James, have you been on the XXXX? ![]() ![]() Nice finds, H. Seems the shed is the magic pudding! What next?
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern |
![]() |
|
|