C8 data plate

[Mike Kelly]

Ah ! Excellent David , slowly but surely we are putting together the whole story for future 8 cwt restorers .

I had no idea about those threads on the end .

Can you tell what gauge the U channel is ? Is it 1/8" thick

I tried some drawings of the frame mounts some years ago , but I was only guessing . Your pics clear it up a lot .

In the pic below , you can see the threads just visible on the lower folding pipe section .

The radio sat on a wooden bench on the forward Rh side . Battery boxes sat on the floor and the radios ancillaries were mounted along the RH side .

Can you PM me your postal address please .

Mike