#331
|
||||
|
||||
Hi Bob
Will do sorry just been busy with the family. With my “spare” time I have these days I did manage to get a bunch of the parts reassembled. The transfer case lever, parking brake lever and the master cylinder mount. These will all be stored away waiting for their return to the frame once that’s ready. The last photo is the clutch road with its clevis. It was a nice surprise to come across the KG#3 under all the grime.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#332
|
||||
|
||||
Clutch and brake pedal assembly fully rebuilt. Three bushings replaced and everything cleaned up and repainted. One pedal still had its original rubber foot pad. I’ve got NOS ones but they have gone hard. Molding and casting supplies have been ordered to make some new ones.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#333
|
||||
|
||||
New pedal pad has been cast. I still have some quirks to work out but it’s getting there.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#334
|
|||
|
|||
Nice work, Jordan.
David |
#335
|
||||
|
||||
Slow but steady. Rear hatch removed for cleanup. Interestingly there were shims behind the hinges.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#336
|
||||
|
||||
The Humber Mk 4 and Panzer 3 we restored also had shims under the various hinges
__________________
1941 Chevrolet, Cab 12 CGT, 7A2 body 1944 Ariel W/NG 1944 Scammell Pioneer SV/2S x 2 1955 Austin Champ, 04BF45 |
#337
|
||||
|
||||
Interesting. Some aspects of these vehicles are pretty crude, then they instal shims under hatch hinges.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#338
|
||||
|
||||
Yesterday’s task in the few hours of shop time was spent getting this one part cleaned up and painted. The handle needed a bit of straightening and a small amount of welding done to fix up where the rod was cracking. One day the rest of the vehicle will look this good.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#339
|
||||
|
||||
The rear viewing hatch was also removed. I’ve included some detail on the linkage assembly.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#340
|
||||
|
||||
Lastly I picked up a needle gun. I needed something that would help remove the old layers of paint. It was proving very slow trying to sandblast off the postwar applied paint. I tried it out on the front hull and was quite pleased with how fast it was removing paint. This should definitely save time and materials when sandblasting.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#341
|
||||
|
||||
The rear viewing hatch is pretty much all rebuilt. There were two castle nuts on the arm pivot bolts that needed replacing. They had taken a bit of a beating from weather coming in the open hatch over the years. Thankfully I found some matching ones on EBay. Bounce they arrive, the rusted ones will be replaced and cotter pins put in as well.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#342
|
||||
|
||||
Next up is removing the heavy cast antenna cable hole covers. These were used to protect the cable hole in the hull armour. Interestingly when I removed them I discovered yellow paint on the metal under the KG#3 paint. I’m thinking they were shop markings during production of the Otter. There was also the remains of the right side antenna mount that had been ripped off the hull.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#343
|
||||
|
||||
When I removed the left cover I noticed more yellow paint under the layers of green. This time it was painted the numbers 277. After sandblasting I found the hand stamped numbers of 326. I suspect these were done during production but as for why, no idea.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
"Falaise" Otter number 2 | Bruce Parker (RIP) | The Armour Forum | 42 | 05-12-22 22:15 |
Otter air cleaner?? | BCA | The Armour Forum | 0 | 10-10-15 23:39 |
GMC Fox MK I and Otter MK I | lssah2025 | The Armour Forum | 2 | 30-07-13 03:49 |
GMC Otter MK I | lssah2025 | The Armour Forum | 11 | 25-03-13 19:54 |
GM Otter car | Libor Zachoval | The Softskin Forum | 3 | 05-03-12 15:09 |