Quote:
Originally Posted by Stuart Fedak
Rob, you are the best.........
|
That's what she said.
Quote:
Originally Posted by Stuart Fedak
I had a small box of Iltis tools from auction, and I could never figure out what that C Clamp was for. Excellent description, and I just tried it out.
I am working on a rear hub at the moment. It looks like I will have to remove the lower ball joint in order to access both of the rears of the adjusters. There was also an Iltis lower ball joint puller in the box, so I finally get to try it out as well. The brake adjuster repair kit pinion NSN 2530218969380 has several parts, and I am not sure as to the order they go in.
The kit contains:
-Adjuster star
-Cap head bolt with centre dimple at end.
-Fibre washer (diameter 22 mm)
-Steel washer (thick concave) (diameter 20 mm)
-Steel washer (thin, saddle shape) (diameter 18 mm)
I just looked at the document Specifications for Rebuilding Hub and Drum Assembly and they refer to the special tool as the riveting machine (AMB 101C).
I will take some pictures of the special tool. The one that I seems to have been well used. The star end is very worn, and may just spin around. Do you hold the bolt head on the back side with a wrench, or just let it spin around?
Cheers!
Stuart
|
The star end (nor the bolt) will not spin once pressure is on it. They did tend to mush up the round part of the tool fairly frequently.
Brakes were a chronic problem with the Iltis. If it wasn't siezed adjusters, then it was worn shoes. Actually, the shoes usually were not worn that often, it was just that the Iltis had a comparatively thin shoe compared to other military vehicles to start with. I saw many Iltis grounded by overeager mechanics, for thin shoes, when they could easily have stayed in service for months waiting for the parts to show up. The bonded shoes we got towards the end were an improvement. The guys weren't so quick to VOR the vehicle when there were not rivet heads getting close to the lining surface.