|
|
#1
19-11-08, 10:16
|
||||
|
||||
Door Hinge Bushing Bushes
Another tricky question;
Does anyone know of a place I can obtain the Ford door bronze hinge bushings? Australia preferred, but not essential. Mac's has the pins: (Which don't wear anyways) B-46335-LONG EACH $3.95 DOOR HINGE PIN Plain steel, passenger except for 32 roadster & Phaeton, extended length for use with hinge pin mirrors Yes, yes, I know I can oversize the old ones, and get an oversize pin turned. Or Put a solid bushing in and ream it out to original pin size. All these methods are a lot of work. Any help is greatly appreciated. Ian
__________________
Ian Williams F15A, 2x Army Land Rover 88' sIIA's GPW Other stuff 
|
|
#2
05-12-08, 22:09
|
||||
|
||||
|
Update
Great news:
Have found a supplier and the goods are ordered, when they arrive I will provide details and part number, photo, and details. (And add it to the master list). Ian.
__________________
Ian Williams F15A, 2x Army Land Rover 88' sIIA's GPW Other stuff
|
|
#3
15-12-08, 12:11
|
||||
|
||||
|
Replacement Bush
Hi all,
The replacement here in Australia is an FB4 bush, from Bearing Services P/L...It is a straight sleeve. DO NOT remove the old bushing, drill it to the O/D of the new bushing and insert.... no one has been forthcoming with a better solution so I am developing my own... It is a 5/16" x7/16" x 1" bush FB4: Ream out your old bush to slightly larger than 7/16" and press insert the new bushing, and you're done. Reassemble hinge assembly. NO saggy door any more.. See: .................................Not hard to do..  Ian
__________________
Ian Williams F15A, 2x Army Land Rover 88' sIIA's GPW Other stuff
|
 |
|
|
Linear Mode
