#1
|
||||
|
||||
Fixing cracked intake
Hi all
Any ideas on fixing a cracked intake manifold for my Willys MB.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
#2
|
|||
|
|||
Jordan
Find another. The inlets give little trouble, whereas the exhausts are often broken/rotten etc. It should be cheap.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#3
|
|||
|
|||
Been using the big hammer again....
Hi Jordan
They can be welded by a specialist machine shop..... it will look awful as they have to build up metal to make it strong..... and it may break again if the tab is not torqued carefully. Finding a replacement is a better fix..... Have you checked Jim in Arnprior...? Bob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#4
|
|||
|
|||
New one will probably cost less than repair
Hi Jordan
I've tried over the years to have both intake and exhaust manifolds fixed. Generally it doesn't work. They fail again after a few years. Did a quick search on the web and I don't think you will have trouble finding a new reproduction for under $125 US. If you really want to find an authentic original I can put the word out in our local MV club to see if anyone has a good original. Here is one site I found on the web http://jeeppartsguy.com/products/?vi...product_id=348 I've never used them. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#5
|
||||
|
||||
Here's a new one for $100.
Willys manifold
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#6
|
||||
|
||||
Brent Mullins (Jeep Parts) here in Texas has intake manifolds for $55US.
WO A-1166 "Manifold, intake, late type" Main web page is http://www.mullinsjeepparts.com/ There are different patterns of manifold depending on year of production and maker so if you want to replace your busted manifold with the correct type for you vehicle, you might need to do a little research. They are all interchangeable though in terms of wartime Willys or Ford production.
__________________
David Gordon - MVPA # 15292 '41 Willys MB British Airborne Jeep '42 Excelsior Welbike Mark I '43 BSA Folding Military Bicycle '44 Orme-Evans Airborne Trailer No. 1 Mk. II '44 Airborne 100-Gallon Water Bowser Trailer '44 Jowett Cars 4.2-Inch Towed Mortar '44 Daimler Scout Car Mark II '45 Studebaker M29C Weasel |
#7
|
||||
|
||||
Thanks for all the help.
Mine is an early intake manifold so I was hoping to get the same. But it looks like they are hard to find. The late ones have the ports for the vacuum attachments. $55 is by far the cheapest price though and I may have to go that route.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer |
|
|