#1
|
||||
|
||||
Info needed on CMP(?) fuel tanks fitted to SAS Jeeps
Who can help Tim, please?
Quote:
|
#2
|
||||
|
||||
most of the CMP tanks I know of have the filler coming out of the side of the top and not in the middle like those ones.
Pictured is a CGT tank which shows where I mean. BUT..... having said that there is no reason why Army workshops could not have modified the tanks to suit their new purpose! |
#3
|
||||
|
||||
Quote:
Source: http://www.oldcmp.net/hedges11.html The tanks in the SAS Jeep seems not to have the prominent fuel sender cover, though. I wonder if these tanks weren't simply purpose-built? H. |
#4
|
||||
|
||||
fuel tanks
tank size is 31 3/4 inch long by 12 wide and 10 deep. This looks to me like a pair of early CMP tanks. The location of the filler is the same as those tanks fitted to short bodied C8 and F8 and also I believe to 11 /12 cab quads with the fuel fillers set into the floor inside the body. The large brass cover plate on the very early tanks and the fuel change over switch were dropped fairly early on i seem to remember reading some where because its difficut to tell what the setting is, (ie if you are running on the reserve or the main tank) certainly I have been caught out before now with the C8. The fuel lift pipe is also in line with a other cmp tanks although the sender unit is not present? I wonder does a higher quality pic show it as capped off?...
anyway just my pennies worth kind regards Nick |
#5
|
|||
|
|||
CMP fuel tanks
On the Jeep picture there is no fuel sender unit fitted , CMP,s tanks have usually a Ford or GM sender in the top . But Early no. 12 cab Quads have a tank with the filler neck sticking out of the top, like on the picture.
13 cab ones have double capacity. |
#6
|
||||
|
||||
Ford CMP tanks
Ford CMP tanks also have a seam folded over on the long side of the tank on the top nearest the chassis. Not saying if the SAS tanks are Ford or not, but there doesn't appear to be a seam. This could mean that the SAS tanks are:
1. Not Ford, or 2. Not even CMP, or 3. Turned upside down with a new filler and pickup tube fitted to the BOTTOM? I also don't see any strapping holding down the SAS tanks. How are they held in place? |
#7
|
||||
|
||||
Hey, good timing!
In the thread Cab 12 FGT for sale , there is a pic of a Ford FAT fuel tank. You can see the Ford seam on the tank and the top mounted vertical filler tube.
[Edited by moderator to include link to picture] |
#8
|
||||
|
||||
Looks like Tim is adamant to go ahead with this project...wanted ads at MilWeb:
Quote:
|
#9
|
|||
|
|||
GM 1944 Parts Book
The fuel tanks with the top fill location where common to both the Ford and GM Pattern 11 and 12 FAT. This required opening the door to refuel through a hole in the floor. Can you imagine pouring gas from a 5 gallon flimsy in the dark. There is a GM field service bulletin about problem of getting your hand around the filler cap because the hole through the floor was only 4” later increase to 5” across.
The Photos are from both the Ford and Chevy Parts books. As to the fuel selector valve this is a stock fuel selector valve common to CMPs, They are still used on duel tank trucks today and are available from various suppliers. The only difference is in the handle which on CMPs was a cast part and now is a stamped steel handle.
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#10
|
|||
|
|||
FGT-02 1943 Ford Parts Book
Still can't seem to link two photos
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#11
|
|||
|
|||
Thanks, Hanno, Phil and every one who has helped with this thread, i finally got registered to ask the question on the fuel cross over switch myself, does anyone know of a supplier where i could get one from? i've tried all over....:
|
#12
|
||||
|
||||
fuel tanks
The tanks on the jeep sure look like carrier fuel tanks
Max |
#13
|
||||
|
||||
Carrier tanks
Is this an Australian Carrier tank?
It's Ford, looks like it's a modified CMP tank, with a fancy brass filler.
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern |
#14
|
||||
|
||||
I'm still not convinced the SAS Jeeps were fitted with CMP fuel tanks, guys. In the pictures I've seen there are no clear fuel sender covers in view.
|
|
|