#1
|
|||
|
|||
CMP towing chain and wire rope
I need your help! Can tell me the length of the chain a wire section?
Thanks in advance!
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT Last edited by m606paz; 20-01-22 at 16:42. |
#2
|
|||
|
|||
Quote:
Dominion Cable. |
#3
|
|||
|
|||
I will be at my Carrier tomorrow, if no one else beats me to it I will measure mine.
__________________
Mike Gurr 1944 Matchless G3L 1944 No2 MK2* UC 10 CWT GS trailer 1944 BSA M20 Royal Enfield RE125 'Flying Flea' |
#4
|
|||
|
|||
Thank you Mike for your help!
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#5
|
|||
|
|||
The number of small links assists identifying if it was issued for Canadian production universal carriers or CMP series vehicles.
Is the wire rope for u. c.’s a larger diameter ? I believe it is. . |
#6
|
|||
|
|||
Hi Michael.
I notice another variation in the photos in this thread. The ‘rope’ end of the chains in the initial photo end with a single heavy duty link. In the photos of the vehicle kit, these ends have an additional, heavy duty circular link added. Would this be a manufacturers variation, or perhaps reflect what type of vehicle for which the chain was intended? David |
#7
|
|||
|
|||
Quote:
The wire ropes are the same lengths, but the carrier rope is a larger diameter. I have seen some lighter rings and D rings as well, but the part manuals ought to cover if they are the same items or not. I have examples of the rope for both the carrier and the CMP. I am hoping to be in the shed for a few minutes tomorrow to rescue the snowblower, but no promises. |
#8
|
|||
|
|||
Hi Mariano, My tow rope/chain is the same as in the picture from Michael R with the large round ring on the end of the chain. From the top of the hook to the far end of the ring is 41", the wire rope from the tip of each eye is 97" and each shackle joining the rope to the chain is 5" long. Hope this helps.
__________________
Mike Gurr 1944 Matchless G3L 1944 No2 MK2* UC 10 CWT GS trailer 1944 BSA M20 Royal Enfield RE125 'Flying Flea' |
#9
|
|||
|
|||
Quote:
I cannot answer your question regards manufacture variation. If you are referring to the image in post #1, I suspect it is post-war modified. It appears sections are missing, and two alternate shape clevis introduced. The wire rope/clevis/chain/hook assemblies on the universal carrier are found with fourteen (14) small links, and that large ring you perhaps reference? The clevis are straight side “U” shape: unlike the “horseshoe” shape shown in Post #1. . Last edited by Michael R.; 23-01-22 at 07:00. |
#10
|
|||
|
|||
Mike
The lengths that you indicate me are of great help, since I can identify some ropes that a surplus dealer has for sale nearby. According to this seller they are from Carrier T16E2 or CMP. They are with some wear, but to hang from the bumper, it will be enough. Thanks again for your help, I'll keep you posted on what I find at this surplus dealer. Regards
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#11
|
|||
|
|||
How I wish we still had surplus dealers where we could find this sort of stuff!!
__________________
Mike Gurr 1944 Matchless G3L 1944 No2 MK2* UC 10 CWT GS trailer 1944 BSA M20 Royal Enfield RE125 'Flying Flea' |
#12
|
|||
|
|||
I agree with Michael R's statement that Mariano's tow rope (first post) shows a post war assembly based on the shackles. I don't think the British military were issued with what I believe are called "Bow" shackles, rather they were issued with "D" shackles. Also the "D" shackles used were likely rated at 2.0 ton swl or 40 Cwt. swl.(also 2 ton) This would imply to me that it was originally issued as a tow rope for a wheeled vehicle as the load rating of the shackles would require both hooks to be connected to the carrier to extract it (4 tons of carrier equals 2 x 2 ton shackles in parallel for a 4 ton pull. Bellied in mud with suction would require double this!) The wire rope is well capable while the hooks, chain and shackles are the weak parts.
In the photo, the two hooks have "D" shackles rated at 2 ton. The center Bow shackle is 3.5 ton rating (high tensile) Generally speaking "D" shackles are not high tensile, while Bow shackles are.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#13
|
|||
|
|||
Many thanks for your helps! This the tow parts i found
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#14
|
|||
|
|||
Great find Mariano
__________________
Mike Gurr 1944 Matchless G3L 1944 No2 MK2* UC 10 CWT GS trailer 1944 BSA M20 Royal Enfield RE125 'Flying Flea' |
#15
|
|||
|
|||
Hi Mike
There wasn't much to choose from... and it matches the measurements you gave me.
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#16
|
|||
|
|||
Hook marking X-1142-2
DC 1944
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#17
|
|||
|
|||
The elusive X1142-2 hooks are one of the harder parts to find., I believe they were also used on the end of the winch cable for the FAT.... I have found examples there.
|
#18
|
|||
|
|||
The correct U shackles are the hard part to find for me. Need four...
And while we're on the topic, did these assemblies come in two sizes? I have an all correct one as illustrated and if I try to stow it on the rear of my carrier it's almost impossible to wind and secure on the original brackets. The single web strap is woefully insufficient and would break very quickly. Was there a smaller, lighter cable? |
#19
|
|||
|
|||
Install on Bumper
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#20
|
|||
|
|||
Information from parts books
From the Chevrolet parts book No. 175 that covers the range of Chevrolet CMT trucks from C8 to C60L and CGT, Tow rope assembly 1798795 (DND #1136) 3/8" diamenter was originally supplied for C8 and C15. Tow rope assembly 5802867 1/2" diameter was later supplied for C8, C15 and C15A and tow rope assembly 1798796 (DND #1135) 5/8" diameter was supplied for C30, C60S, C60l and CGT. no lengths are given.
From parts book C15A-04 for the Chevrolet 15cwt 4x4 - the tow rope 5802867 is stated to be 1/2" cable (no length stated) and the later hooks are part DND#1185 (they also have a Chevrolet part # 5268915). From parts book C60S-03 for the Chevrolet 3 ton 143"WB the tow rope assembly 1798796 is stated to be 5/8" cable - no length given. Same hooks used as on C15A. From parts book CGT-03 for the Chevrolet Gun Tractor the tow rope assembly is the same as for the C60S. From parts book C60X-04 for the Chevrolet 3 ton 6x6 the tow rope assembly is the same as for the C60S. From the Ford parts book S.E.-39-42 which covers the full range of Ford CMP trucks 8cwt to 60cwt and FGT - tow ropes C011D-17186A and C011D-17186B are 3/8" diameter, unspecified length - used on F8, F15 and F15A. Tow Rope C01Q-17186 is 5/8 diameter, used on F30, F60S, F60L, F60H and FGT, no length given. From parts book FSC2-01 for the Ford lynx II Scout Car the steel tow rope C011D-17186B is stated 15' long, no diameter given. From the parts book FUC-02 for the Universal Carrier Mk I* the tow rope assembly has part number C01Q-17187 (U.K. #25485) but no diameter or length is given. Conclusion:The Ford tow rope assembly C011D-17186B uses 3/8" diameter cable and is 15' long for 8 and 15 cwt trucks. Confirmed by parts book F15A-01. |
#21
|
|||
|
|||
The carrier used the heavier cable. The cmps had a lighter cable. I believe the chain rings and D rings were also smaller for the CMP.
Ribtors (now closed) in Calgary had a pallet of the chainends for the carriers, although there were a few smaller ones in the mix. They also had a pile of the D rings form that era, again a bit smaller than the ones on my carrier cables. And they had lots and lots of the smaller diameter tow cables. Same length as the carrier, but smaller diameter. My carrier cables came from Brian Asbury. Pretty sure he would have had the part number on some of the examples. I have picked up some of the hooks in the strangest of places. Besides the surplus yard, I have found them at farm auctions and garage sales. But they are one of those items you can never find enough of. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chain tensioner tool | m606paz | The Softskin Forum | 0 | 25-03-21 03:05 |
For Sale: 1/2 ton chain fall | Perry Kitson | For Sale Or Wanted | 0 | 25-02-16 01:38 |
Wanted: carrier tow chain assy. | Lynn Eades | For Sale Or Wanted | 0 | 13-02-16 21:54 |
For Sale: One ton chain hoist | peter simundson | For Sale Or Wanted | 0 | 15-09-15 21:29 |
Carrier tow chain and wire assembly | andrew honychurch | The Carrier Forum | 4 | 17-06-12 08:51 |