For Sale or Trades: M151A2 Stuff

[Scott Bentley]

I'm getting to the point now where the left overs from my M151A2 buildup are starting to pile up. With a potential posting out east looming in my future, I need to start thinning out some things as moving all of this stuff is going to be unpractical. I've put together a small list, which I will continue to add to as I determine whats surplus. I'll also add some photos when I get a chance. So here goes:

- NOS Front Seat Vinyl Cushion Bottoms x 4. Will work for 2 Front Seats in a pinch.
- Front Seat Canvas, Back and Bottom Cushions. Enough for one Complete Front Seat. Take out, but not crispy or ripped.
- NOS Vinyl Top, still rolled up, never used. Just the Top, no Side Curtains or Door Skins.
- NOS AM General Large Underbody Corrosion Repair Kit, minus the gawdy Rear Panel.
- Front Suspension Assembly, Take Out, mostly disassembled, but all there.
- Windshield Frame, Sand Blasted and Painted, nice and straight, no Glass or Wiper Motor.
- Grill, Take Out, No Lights, some easily fixed tweaks, but quite usable.
- Power Pack, 46K, no Rebuild Tags, was run in the summer. Will basically be sold as a Long Block as i'd like to keep the accessories. Includes the Trans and T-Case.
- Rear Seat Frame, a bit tweaked from a fat guy sitting in it , includes rough but very usable Canvas Cushions.
- Gas Tank, Take Out. Bit of rust inside, but not too shabby.
- Front Wiring Harness, Take Out, but all there.
- Zenith Carburetors. I've got a couple of spare Take Outs.
- Drive Shafts, Front and Rear, rusty but useable.
- Trans Body Cover, Take Out, but useable.
- Bumperette, Good Take Out.
- .50 Cal Ammo Can Tray and Flex Mount.
- Heater Fan Motors, Take Out x 2.
- Heater Core Box, Take Out.
- Windshield Defroster Louvers x 2.
- US Sugar Scoop Antenna Mount.
- Windshield Wiper Motor, Take Out.
- Steering Box, and Drag Link/Tie Rods, Take Out.

There are a bunch of smaller bits, like electrical items, that i'll list after I take a more detailed inventory. If there is something anyone is after specifically, please ask.

As for trades, i'm looking for a 1/4 Ton Trailer or Comms Gear, specifically:

- RT-524, condition not super important, as long as its complete inside and out. I'd be willing to work out a combination of trades and cash depending on what was needed.
- M100 (Preferred) or a M101CDN2/M416, 1/4 Ton Trailer. Condition is not really important as long as its not a total basket case. I'd throw in some cash depending on what was wanted in trade.

Showing up in Trenton with a half decent 1/4 Ton Trailer would force my hand into a great deal for someone.

As for pricing, i'm open to offers as i'm really not sure what to ask. I am much cheaper than TNJ Murray mind you Pick up or delivery is possible depending on location and where my travels take me.

Scotty B

[Scott Bentley]

Forgot to mention, you can reach me here by PM, or e-mail me

[Eric B]

Hello Scotty

I talked to Don who has your Ex M151 and he will be contacting you as to the parts that he needs.

He might know of a person looking for the Flex mount and tray as well.


Thanks
Eric

[Scott Bentley]

Originally Posted by Eric B

Hello Scotty

I talked to Don who has your Ex M151 and he will be contacting you as to the parts that he needs.

He might know of a person looking for the Flex mount and tray as well.

Thanks
Eric

Sounds good Eric,

This would get him well on his way to building up the other one.

I'll have to dig out that .50 Cal Mount. I was hoping someone might use it.

Scotty

[Scott Bentley]

List Updated...