|
|
#1
13-07-14, 19:50
|
|||
|
|||
Drawings help, shutter plunger.
Hello,
Can anyone help me with the missing dimensions on my drawing. I'm making some of the locking plungers for the shutters. I have an original to copy, but the end that goes into the holes to lock the shutters has suffered some corrosion and is difficult to get a true dimension. Would someone be able to tell me the lenght and diameter as shown below. Thanks. plunger pin.pdf Last edited by John A. Rippingham; 13-07-14 at 22:05. 
|
|
#2
14-07-14, 02:22
|
|||
|
|||
|
Pin dimensions
John
I have 3 NOS pins and the plunger measures as overall length 42.50 mm, 1.6735", 1 43/64 pin length 3.48 mm, .137 , 9/64 pin width 4.85 mm .192 , 25/128 Do you have a drawing for the pin housing?
__________________
Roberta Jayne Melville CD II QJ MK I * universal carrier 1942 WLC Harley under restoration 1957 M38A1 jeep R.E.L. optical equipment Military manuals Field phones MK II 19 set (needs work) 4 MK III W-19 sets AN/PRC-9 CPRC-26 WS-29 componets WS-38 AFV WS-38 MK III WS-48 with generator WS-58 MK I MK V heliograph
|
|
#3
14-07-14, 07:19
|
|||
|
|||
|
thanks
Hello Roberta,
Thank you very much, it's just those dimensiond i need, i have an original brass housing to copy. Best wishes John
|
|
#4
10-08-14, 23:24
|
|||
|
|||
|
Hello Roberta,
Could you check me a couple more dimensions please. Can you tell me the lenght and diameter of the pin that goes through the plunger pin.  And if you have the spring could you give me the lenght and diameter of spring.thanks John Last edited by John A. Rippingham; 10-08-14 at 23:30.
|
|
#5
11-08-14, 00:08
|
|||
|
|||
|
john I've got an original you can borrow.
rick
__________________
_______________________ 1941 mk1 mortar Carrier 1941 Mk1* Carrier 1942 Mk1* Carrier 1943 T16 Carrier 1945 Mk3 Dingo 1941 Mk3 Covenanter 1941 Mk4 Churchill AVRE (now sold) 1944 Mk6 Cromwell (now sold) 1952 Mk3 Centurion 1952 ARV Centurion 1952 ARV Centurion 1953 Mk3 Centurion (breaking)
|
|
#6
13-08-14, 21:57
|
||||
|
||||
|
plunger reproductions
I posted plunger reproductions for sale, hope it might be helpful.
http://www.mapleleafup.net/forums/sh...d=1#post198770
|
|
#7
13-08-14, 23:37
|
|||
|
|||
|
So have i
Hello,
I'm just finishing a batch of these, plungers pins and bushes done, just trying to source the springs and pins to complete them. Mine are priced a £120 for a set of three. john
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| shutter glass | Dale Jordan | The Carrier Forum | 9 | 23-09-15 09:41 |
| For Sale: Five U.C. shutter parts | Michael R. | For Sale Or Wanted | 5 | 20-01-14 16:57 |
| Sold: Carrier vision shutter screens | Marc van Aalderen | For Sale Or Wanted | 10 | 11-07-13 22:07 |
| observation Shutter Button | ron | The Carrier Forum | 11 | 05-02-11 05:02 |
| Shutter glass holder | ron | The Carrier Forum | 6 | 06-02-07 05:03 |
Linear Mode
