#1
|
|||
|
|||
Piston Rings
Can anyone tell me where I can get oversize piston rings for the Ford V eight side valve engine,in Aust ?
Regards Ron
__________________
Ron Winfer |
#2
|
|||
|
|||
Hi Ron,
There must be a zillion places here, that sell oversize rings for the sidevalve V8 - aren't there ? I'd imagine that adverts in the Restored Cars magazine would provide some avenues for you to explore. Here in the West, there is a mob called Early Ford Parts (Ron West on 0418 935 613), who are in the game and might be able to assist. However, whenever I've wanted Dodge parts, I've found it much cheaper and just as quick, to go direct to the suppliers in the US, via their websites. Jack |
#3
|
||||
|
||||
Rings
Ron,
Good old rings for Ford V8's are 239 CI Engine. The Bore size STOCK is 3.1875" The ring gap is 0.009" to 0.014" Width of rings is 0.91" to 0.92" Gap Width is .009" to .014" Take these details & visit your local engine reconditioner & they might be able to provide (suitable) replacements. If you are reboring oversize, you will need new pistons & rings, not just rings.. OR try http://www.flatattackracing.com/ (hmm I am starting to sound like a broken record) I haven't bought anything from them yet as the budget is blown on waterpump rebuilds this month! Oh and I am offering this advice, as its WAYYYY too hot out in the garage at 39C... Hmm wondering if it's over 5C in Canada... Ian
__________________
Ian Williams F15A, 2x Army Land Rover 88' sIIA's GPW Other stuff |
#4
|
||||
|
||||
Rings
Hi Ron - 85 or 95hp. First is 3 1/16 with latter, Mercury 3 3/16. Try Antique Auto Spares here in Adelaide. John Biddle 08 8268 5541. If no luck I know a scrappie in Port Pirie, if he is still operating, or alive, who had heaps of ring sets. Contact me if the latter is required and I'll try to make contact.
Bob
__________________
Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com |
#5
|
||||
|
||||
What size do you need, Ron. I have several sets in different O/S's for 3 1/16 and 3 3/16, genuine and aftermarket.
Swapmeet season around here is rapidly approaching, and you can always find a set or two of rings at a price too good to refuse.
__________________
You can help Keep Mapleleafup Up! See Here how you can help, and why you should! |
#6
|
|||
|
|||
Rings
Hi Tony,
Thanks for your reply, the ones I need are 3 3/16, I will get back to you in a few days, we have someone coming out to have a look at the engines,and will have a better idea then , thanks mate, REgards Ron
__________________
Ron Winfer |
#7
|
|||
|
|||
rings
Hi Ian,
Thanks for the information regarding the piston rings, its been over 40 in my workshop the last few days so I have given it a miss on the engine rebuild for a couple of days,its bucketing down with rain at the moment,very humid, Regards Ron
__________________
Ron Winfer |
#8
|
|||
|
|||
rings
Hi Bob,
I have made a note of your info and will get back to you many thanks Regards Ron
__________________
Ron Winfer |
#9
|
|||
|
|||
rings
Quote:
__________________
Ron Winfer |
|
|