|
|
|
|
#1
09-05-13, 08:14
|
|||
|
|||
Rear axle help
Hi
Whilst stripping the rear axle on the scout it turns out that the coupling sleeve on the pinion shaft that engages with the gear box is missing the spacer, washers and bolt. It looks like the bolt is 5/8 NF. Does anyone have the parts below for sale or have them to measure, the thicknesses are the most important the diameters would help but can be worked out. TL 3307 Spacer TL 876 the heavy washer TL 878 locktab washer TL 8850 screw (this is 5/8" NF) Thanks Ben 
|
|
#2
09-05-13, 21:52
|
|||
|
|||
|
hi ben
is this what you need
__________________
_______________________ 1941 mk1 mortar Carrier 1941 Mk1* Carrier 1942 Mk1* Carrier 1943 T16 Carrier 1945 Mk3 Dingo 1941 Mk3 Covenanter 1941 Mk4 Churchill AVRE (now sold) 1944 Mk6 Cromwell (now sold) 1952 Mk3 Centurion 1952 ARV Centurion 1952 ARV Centurion 1953 Mk3 Centurion (breaking)
|
|
#3
09-05-13, 22:03
|
||||
|
||||
|
Quote:
No, the spacer required goes on the splined end of the pinion shaft and sits between the locknuts and the internally splined coupling. Just the dimensions will suffice. regards, Richard
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor
|
|
#4
10-05-13, 04:25
|
|||
|
|||
|
trans part
While you are in there Ben, is it a good time to update the oil seal fittings?
Last edited by Michael R.; 13-05-13 at 13:55.
|
|
#5
10-05-13, 06:59
|
|||
|
|||
|
Are the seals readily available? I have had a quick look at an SKF catalogue on line and they are not available. A quick look at metric alternatives would require an external mounting ring to be made up for both seals.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#6
10-05-13, 07:59
|
||||
|
||||
|
Quote:
No problem, seals can be made for any size. I had a stack done for a WW2 armoured car recently where the outside diameter was larger than stock items. Not expensive either. No need for adaptor rings then. regards, Richard
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor
|
|
#7
10-05-13, 08:37
|
|||
|
|||
|
Quote:
__________________
Shaun Hindle Morris C8 Ford GPW jeep 1945 Morris 1000 (ex mil) SAS LSV Harley Davidson MT 350 motor cycle Universal carrier MK 1*1943 Ronson (under restoration) Universal carrier MK 2* 1944 (Puddle Jumper HSK 345) Ferret MK 1/1 1956 Ferret MK 2/4 1958 CVR(T) Scorpion 432 MK2 Daimler MK1 armoured car 1943 (winner best wheeled armour W&P show 2011) Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011) Fordson WOT 3 D 1940 (awaiting restoration )
|
|
#8
10-05-13, 09:37
|
|||
|
|||
|
hi shaun
i scrounged mine from kevin last week along with the gear coupling (cheers kev) but i'm thinking of having a couple made as they seem quite hard to find, so if anyone else wants one nows the time to speak. rick
__________________
_______________________ 1941 mk1 mortar Carrier 1941 Mk1* Carrier 1942 Mk1* Carrier 1943 T16 Carrier 1945 Mk3 Dingo 1941 Mk3 Covenanter 1941 Mk4 Churchill AVRE (now sold) 1944 Mk6 Cromwell (now sold) 1952 Mk3 Centurion 1952 ARV Centurion 1952 ARV Centurion 1953 Mk3 Centurion (breaking)
|
|
#9
10-05-13, 16:35
|
|||
|
|||
 Me! Me! Me! please... Jim
|
 |
|
|
Hybrid Mode
