MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Carrier Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 10-05-10, 22:34
Doug Lavoie Doug Lavoie is online now
Registered User
 
Join Date: Dec 2005
Location: Beaumont, Alberta
Posts: 206
Default Fuse box - technical question

I am trying to track down the proper fuse box - card wire (if that`s the proper name). I do not know the wire type, size, and where it can be found. Is there any one out there who could help with this info.? I am trying to get the fuse box for my Mk1* ready, but... no wire.
I have included some attachments as to the problem. Any help would be appreciated.
This holds true for the Mk11* fuse box and cards, same problem but different person with the problem. This one does not have the cards, and needs some, as well as the wire. Any idea`s on to where to find them?
I am assuming the amount of wraps of wire gives you a resistance for each card, am I right?
Thanks,
Doug
Attached Thumbnails
fuse01.jpg   fuse block1.jpg   Mark 11 inst fuse box.jpg  
Reply With Quote
  #2  
Old 11-05-10, 01:45
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,541
Default Doug

The fuse wire is just house fuse box wire (5, 10, and 15 amp rated)
The fuses were a british thing , CAV, try old Britsh trucks, Leylands, Coles cranes, Valentine tanks, All those things that you would normally hold a crucifix up to (no offence intended)
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #3  
Old 11-05-10, 03:27
T Creighton T Creighton is offline
Registered User
 
Join Date: Nov 2005
Location: Katikati New Zealand
Posts: 167
Default Fuse wire

Quote:
Originally Posted by Doug Lavoie View Post
I am assuming the amount of wraps of wire gives you a resistance for each card, am I right?
Thanks,
Doug
Hi Doug,
At a guess I would say that the wrap around wire is just a convenient way to keep spare wire. It should only need a short length across between the two terminals. You could easily make the cards with some fibre board , some brass rivets and a bit of thin scrap brass. Keep in mind house voltage (230 in NZ) and vehicle voltage gives different gauge wire for a given amperage.
Regards,
Terry
__________________
Terry
F30 13 Cab CMP
Morris Commercial C8
Reply With Quote
  #4  
Old 11-05-10, 04:01
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,541
Default Doug

Terry is correct. It is just somewhere to store the spare wire. As far as the rating of the fuse wire goes; 10 amps at 12 volts is 120 watts. 10 amps at 240 volts is 2400 watts. The wire is still the same though.
Doug there should only be one strand of wire between the two sides.
Dont old house fuse boxes in Canada, have ceramic fuses that have a replaceable wire?
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #5  
Old 11-05-10, 06:32
Philliphastings's Avatar
Philliphastings Philliphastings is offline
Registered User
 
Join Date: Feb 2004
Location: Sunny Australia
Posts: 528
Default old lorrys

Hello, Lynn is entirely correct re the source of LUCAS/CAV electrical parts. I was lucky enough to get some parts from an old scrapped valentine tank instrument panel. Some of the instruments were the same as used in the British Mk1. Centurion tanks use the same type of wedge fuses and even early landrovers use a similar voltage regulator and fuse box. Old british lorry are a great source of parts as they use the same parts as well.

Cheers

Phill
__________________
Ford GPW Jeep USMC Ambulance
Willys MB Jeep
Daimler Ferret Mk 1
Daimler Ferret Mk 2
Land Rover S2A Field Workshop
Land Rover S3 FItted For Radio x2
Land Rover Perentie GS (SASR)
International No 1 Mk 3 2.5 Ton 4x4
International No 1 Mk 4 2.5 Ton 4x4
Reply With Quote
  #6  
Old 11-05-10, 09:39
Doug Lavoie Doug Lavoie is online now
Registered User
 
Join Date: Dec 2005
Location: Beaumont, Alberta
Posts: 206
Default

Lynn,
I have not come across any fuses in Canada that have the wire type of fuse, or the wire in any amp rating. I could stand to be corrected but... .Vintage car parts UK has one remaining fuse box type with the cards in their on line cat. They do not sell the wire or spare cards.
I will look up Leyland and inquire about the fuse wire. If anyone knows where I could find some, please let me know.
Thanks
Doug
Reply With Quote
  #7  
Old 11-05-10, 11:10
Doug Lavoie Doug Lavoie is online now
Registered User
 
Join Date: Dec 2005
Location: Beaumont, Alberta
Posts: 206
Default

I found some fuse wire on E bay in England. 5,15, 20, 30 amps.
Doug
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 22:23.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016