#1
|
|||
|
|||
Diamond Plate for HUP floor
Hi,
I am looking for a supplier of 16 gauge mild steel diamond plate in the UK. At some time the rear floor of my HUP has been patched with flat plate. Any leads would be great! Thanks James
__________________
C15 TA 1944 Ford Lynx 1945 C8A HUP 1943 Willys MB Jeep 1942 New Zealand pattern wheeled carrier 1943 (project1) New Zealand pattern wheeled carrier 1943 (project2) |
#2
|
|||
|
|||
Are you sure it is a replacement?
Hi James
Are you sure your floor plate has been replaced? Reason I ask is that some HUPs, as I understand, had flat steel floors which were overlaid with plywood and linoleum. Which version HUP do you have? My 45 HUP has square dot pattern sheer metal in the rear area, and the more standard bar pattern diamond plate in the front area. In the US you can get a vynal sheet footing that I've thought about using over the floors as sound deading. Here is picture of my HUP rear flooring for reference. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#3
|
|||
|
|||
If my memory is correct, the steel floor in the rear of Rob Clarke's 1945 HUP/staff car is also plain steel.
|
#4
|
|||
|
|||
My HUP is an early 43 with two side doors. The rear floor has been welded where it has cracked in the past and two flat strips have been put in across the width of the body by the rear door and also just behind the side doors. The style of the diamonds matches the plates in the cab, so I think it is original.
__________________
C15 TA 1944 Ford Lynx 1945 C8A HUP 1943 Willys MB Jeep 1942 New Zealand pattern wheeled carrier 1943 (project1) New Zealand pattern wheeled carrier 1943 (project2) |
#5
|
||||
|
||||
The staff cars used the same stuff as the regular HUPs but they just flipped it over and welded it in.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#6
|
||||
|
||||
Teardrop plating
My HUM has the classic one teardrop plate in the back
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Floor bins | Ron Pier | The Carrier Forum | 0 | 07-07-14 21:08 |
iltis floor pan | jpeters | The Restoration Forum | 0 | 31-05-12 19:29 |
T-16 Floor Gunner Box for sale | khern2365 | The Carrier Forum | 0 | 22-02-12 04:25 |
iltis floor | jpeters | The Restoration Forum | 0 | 12-07-11 00:22 |
M151A2 battery box floor | Eric B | The Restoration Forum | 0 | 25-01-11 00:53 |