MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Armour Forum

Notices

Reply
 
Thread Tools Display Modes
  #31  
Old 15-09-17, 23:27
colin jones's Avatar
colin jones colin jones is offline
Registered User
 
Join Date: Jun 2007
Location: Adelaide
Posts: 1,810
Default

John, excellent job you're doing and great fabrication work. Have you decided on a drive train yet and what type of tracks are you going to use.
Reply With Quote
  #32  
Old 25-10-17, 21:25
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

Evening all,

I have been very busy, the upper hull is complete, painted and waiting for me to make all the fittings. The drivers vision cover is complete. The turret has been painted and the markings applied and now I just need to assemble all the fittings into it. I decided that while I am making other bits it would be nice to have a stand so that I can sit the turret on top of the upper hull and as you can see that's done but I am going to add some casters so that I can move it around easily.

Jon
Attached Thumbnails
DSC04368.jpg   DSC04369.jpg   DSC04370.jpg   DSC04371.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #33  
Old 25-10-17, 21:35
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

Some more pictures
Attached Thumbnails
DSC04381.jpg   DSC04391.jpg   DSC04395.jpg   DSC04400.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #34  
Old 25-10-17, 21:40
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

And lastly for now.

Jon
Attached Thumbnails
DSC04401.jpg   DSC04402.jpg   DSC04405.jpg   DSC04409.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #35  
Old 12-11-17, 22:47
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

I have been beavering away as usual and to tell the truth the turret ring took longer than anticipated but now I have a turret that rotates. I spent this weekend assembling the turret on to the upper hull and fitting all the various components. There are still a few details to finish but on the whole I am quite happy with it and excited to be starting the running gear and lower hull, oh goody.



Jon
Attached Thumbnails
DSC04452.jpg   DSC04453.jpg   DSC04454.jpg   DSC04455.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #36  
Old 12-11-17, 22:53
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

A few more.
Attached Thumbnails
DSC04457.jpg   DSC04459.jpg   DSC04466.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #37  
Old 12-11-17, 22:57
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

And then, all I needed was a dummy to stand in the turret but don't tell my son I said that.

Jon
Attached Thumbnails
DSC04478.jpg   DSC04479.jpg   DSC04436.jpg   DSC04437.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #38  
Old 13-11-17, 00:36
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Very impressive work Jon! I cant wait to see what you do next.
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #39  
Old 13-11-17, 08:35
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

Thanks Wayne
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #40  
Old 13-11-17, 19:24
r.morrison r.morrison is offline
Registered User
 
Join Date: Nov 2007
Location: vancouver b.c.
Posts: 815
Default Amazing!!!

Jonathan: You just never cease to amaze me with your workmanship. Hopefully your son appreciates your "gift of talent" now or in the future. Hats off to you! Robert :
Reply With Quote
  #41  
Old 13-11-17, 23:59
BCA BCA is offline
Brian Asbury
 
Join Date: Oct 2006
Location: Ontario, Canada
Posts: 658
Default Flipping an axle

I would like to revisit the axle discussion and the proposed solution of flipping the drive axle to allow for correct gearing. I recently saw a T16 drive axle mounted upside-down in a replica armoured vehicle which unlikely ever been driven because there was no engine. However my suspicions are that there would be major fluid issues from operating the axle upside down: either leakage or failure to have proper fluid distribution. Anyone with experience or an opinion?
Reply With Quote
  #42  
Old 14-11-17, 04:12
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,191
Default A long shot but......

In the good old days of dune buggies when one installed a Corvair engine onto a VW trans-axle ( with an adapter plate) it was necessary to flip the ring gear assembly of the VW trans-axle to accommodate the different rotation of the Corvair engine...... I have never seen the inside of a T16 axle....but is it feasible????

From the overall appearance of the T16 axle it seems to have some sort of wet clutch assembly on each side....if so the concern from BCA may be very appropriate.......

If the T16 axle was simply rotated flat.... not upside down...... the input to the gear cluster(driveshaft) would need to be reversed...or you get 1 forward and 4 reverse gears......

But the rotation of the driveshaft to the front axle can be changed by feeding the transmission output into a regular CMP transfer case and using the front axle output of the T case which would effectively reverse the rotation...... and with a 2 speed T case it would add the low gear ratio......

You need a paper and pencil sketch to fully understand it....... but I believe it can be done!!!! will need to take my sketch to the barn and verify my assumption..... all based on a clockwise rotation of the engine when seen from the front!!!!!

And from having taken T cases apart with its massive straight cut gears, I believe it can be driven backwards....

Now in this instance, with the engine located off center to the right, I would feed the engine/transmission output into the front axle yoke of the Transfer case and use the input shaft (where the transmission is usually connected) of the transfer case to feed the front central gear cluster mounted T16 axle.

Not sure how much space is available to install the T case.

Comments please....

Cheers
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada

Last edited by Bob Carriere; 14-11-17 at 04:33.
Reply With Quote
  #43  
Old 14-11-17, 04:20
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

On the armoured snowmobile/penguin models, they used an upside down T-16 axle. Have a look at "Mud and Snow Vehicles...page 24 and it details the changes required.

Last edited by rob love; 14-11-17 at 04:30.
Reply With Quote
  #44  
Old 14-11-17, 11:17
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

Robert,
good to hear from you and thanks for the inspirational comments. I actually don't think that my “gift of talent” as you refer to it, is a gift, more of a curse. It seems that in this day and age of the throw away, people who can do, are not required or valued. I would love to make a living doing this sort of work but there's not a market for it around here. My Grandfather always told me that engineers would be worth their weight in gold one day but it seems not in my life time.

RIGHT, THE DRIVE TRAIN.

Firstly thanks for the discussion.

Now that I have a clearer picture of where I am going with the project, I have made some working decisions.

I don't have a T16 axle and if I did I couldn't bring myself to cut it up for this application.

I estimate that the completed tank will weigh between 5 to 6 tons.

Its not going to be used to invade Poland but it has to work and be reliable. It is, after all, just an engineering exercise.

Therefore I intend to use components that are available in the UK, relatively cheap and plentiful and that I know.

Working on a power to weight ratio of 15bhp per ton, I am going to use a Land Rover 2.5 diesel 300 TDI, which in theory produces 110 bap. Connected to a standard 5 speed gear box but run through a reduction box to reduce the gearing.

The steering will be a simple braked differential, again using a modified Land Rover axle casing and differential. As per an original PZII.

The steering brakes, and this will be interesting, are going to be discs, with a set of drum brakes either side to act as parking brakes.

All this will be camouflaged to look like the original drive train. The length of the Land Rover engine and gear box will just fit in to the engine bay, which elevates the problem of trying to recreate the original configuration of a remote clutch and gearbox. Running the gearbox through a reduction box will negate the need to turn the differential upside down, but in all honesty I don't think that this would matter in this case.

All your comments and suggestions are greatly appreciated, as are any suggestions on where, in the UK, to get track links cast.


Jon
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #45  
Old 10-12-17, 10:13
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

There doesn't really seem much to show you because I have been fabricating and machining lots of components ready to install into the hull. It all takes loads of time for what seems very little result. Firstly sorry for the quality of the pictures the light wasn't very good tonight. As you can see from the pictures ,the main hull has been welded together and over the next week I will attempt to weld the various components in place. I hope by tomorrow night to have rolled the front of the hull but its a major job with my very limited equipment so it may take more than one attempt but we will see.

The 3rd and 4th pictures are the inner and outer bearing houses for retaining the radius arms into the hull side and the plates with the holes in are strengthening ribs. First job tomorrow, before rolling the front, is to get the 4 front housings in place and accurately in line. Not an easy job by hand, these housings would have been machined on a special machine so that everything lined up perfectly but I don't have such a machine so fingers crossed.


Jon
Attached Thumbnails
DSC04511.jpg   DSC04512.jpg   DSC04516.jpg   DSC04517.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #46  
Old 10-12-17, 13:01
kevin powles's Avatar
kevin powles kevin powles is offline
Registered User
 
Join Date: May 2006
Location: united kingdom
Posts: 1,955
Default

Looks suberb, well done.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008.
3" Mortar Universal Carrier 1943 registered 06/06/2009.
1941 Standard Mk1 stowage Carrier, Caunter camo.
1941 Standard Mk1 stowage Carrier, light stone.
10 cwt wartime mortar trailer.
1943 Mk2 Daimler Dingo.
1943 Willys MB.
1936 Vickers MG carrier No1 Mk1 CMM 985.
Reply With Quote
  #47  
Old 10-12-17, 20:39
James P James P is offline
Registered User
 
Join Date: Mar 2016
Location: Canada
Posts: 386
Default

Really amazing fabrication skills there in your build. Why the Dunkelgelb for the interior Vs White ??
Reply With Quote
  #48  
Old 10-12-17, 22:39
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

I am glad that it meets with your approval, its good to hear peoples comments and suggestions they all go into the computer.

Its not actually Dunkelgelb its the correct RAL colour, RAL 1001 Ivory for the interior of German tanks. I assume that white got dirty too quickly and maybe it reflected any interior light too much but I don't actually know for sure.

Jon
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #49  
Old 11-12-17, 01:59
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB
Posts: 3,384
Default

Jon,

Nice work.

I recall reading somewhere that German Armour was often two toned inside. The ivory colour you are using being applied to the upper portion of the interior, but the lower hull area sometimes left in red primer. Have you ever run across this?

David
Reply With Quote
  #50  
Old 11-12-17, 02:22
Dave Newcomb's Avatar
Dave Newcomb Dave Newcomb is offline
Registered User
 
Join Date: Dec 2016
Location: nr Portland Or
Posts: 91
Default Engine rotation direction

Hi; Just a note; Many engine mfgrs have marine/ industrial options that feature a reverse rotation. It's often a cam/ ign change. Newc
Reply With Quote
  #51  
Old 11-12-17, 09:56
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

David, You are right regarding the two tone interior colour but from what I can ascertain it was a mid to late war trend intended to save time and paint. Although in reality there doesn't seem to be any concrete evidence as to why. I think that Its unfortunate that so much time and research is spent on every detail of the bigger German tanks and that these earlier models, that were so important, are largely ignored.

Jon
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #52  
Old 11-12-17, 13:52
James P James P is offline
Registered User
 
Join Date: Mar 2016
Location: Canada
Posts: 386
Default

Paint on vehicles, always a subject to see folks hair go on fire. My viewing of the interior of German vehicles interior with original/factory paint is rather limited and less then the fingers on one hand. Early war tanks, maybe that beige 1001 is good and correct, I know it is correct for a Sd.Kfz.251 (and not some OT 810 jazzed up to look like a 251) mid war and being open topped makes sense. A tank being a more closed down vehicle could be off white gloss enamel so its less "cave like" with a low watt interior light bulb and easy to wipe clean. As an economy measure areas like a engine compartment (such as the Whirbelwind at Borden) show primed engine compartment, white/ivory paint in hull interior and I can only assume the open top gun turret is the same DG paint on both interior as exterior. Again I am NOT an expert on what the original/factory paintwerk would be on German armour during various years and types of vehicles AND as it is your vehicle it is yours to paint as you wish. That all said I really do salute the terrific work you have put into this work and it is something you should be proud of. What will you be running it on track with ? Universal carrier?
Reply With Quote
  #53  
Old 11-12-17, 19:43
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

Quite a good day today, lots of bits tacked in ready for hopefully rolling the front of the hull on tomorrow.

Jon
Attached Thumbnails
DSC04522.jpg   DSC04524.jpg   DSC04525.jpg   DSC04527.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #54  
Old 19-01-18, 21:54
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default update

progress, progress. Bending the radius on the nose of the hull was fun lots of leverage and heat, which was most welcome on a cold day. I gave it a coat of red primer to keep the surface rust at bay.
Attached Thumbnails
DSC04530.jpg   DSC04543.jpg   DSC04569.jpg   DSC04570.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #55  
Old 19-01-18, 22:04
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

All ten suspension arms are now complete, apart from the wheel and locating arms which is my next job on the lathe.

Oh and I made a chocolate cake.

Jon
Attached Thumbnails
DSC04574.jpg   DSC04576.jpg   DSC04579.jpg   DSC04561.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #56  
Old 19-01-18, 23:15
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB
Posts: 3,384
Default

Is the cake still there???

David
Reply With Quote
  #57  
Old 20-01-18, 00:11
Bruce Parker (RIP) Bruce Parker (RIP) is offline
GM Fox I
 
Join Date: Feb 2003
Location: SW Ontario, Canada
Posts: 2,606
Default

Quote:
Originally Posted by David Dunlop View Post
Is the cake still there???

David
I bet the chocolate lab got it.
Reply With Quote
  #58  
Old 20-01-18, 10:24
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

The dog didn't stand a chance, my son had most of it. Just a tip for all those making such a cake, if you put the chocolate eggs on when the topping chocolate is still warm, the inside goo of the egg dribbles over the top and down the sides of the cake. There's lovely.

Jon
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #59  
Old 20-01-18, 15:11
Bruce Parker (RIP) Bruce Parker (RIP) is offline
GM Fox I
 
Join Date: Feb 2003
Location: SW Ontario, Canada
Posts: 2,606
Default

Quote:
Originally Posted by Jonathan Moore View Post
The dog didn't stand a chance, my son had most of it. Just a tip for all those making such a cake, if you put the chocolate eggs on when the topping chocolate is still warm, the inside goo of the egg dribbles over the top and down the sides of the cake. There's lovely.

Jon
I think your description of the dribbling goo and its effect is a little too graphic for those of us still under 18 years of age...

Still, seamlessly moving from tank bogie suspension arms to chocolate cake does demonstrate a certain diversity in skill sets!!
Reply With Quote
  #60  
Old 21-01-18, 18:37
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

A mans got to eat and my wife doesn't like cooking so needs must when the devil drives.

Although I had drawn the suspension arm location shafts on CAD, I decided that I would make a set just to make sure that some plonker, that,s me, hadn't cocked up. Well it turns out that I hadn't. The outer bearing housing retainer has an oil seal pressed in to stop the ingress of dirt. Then there's the complete set, bearing housing retainer, shaft, bearings, the relevant spacers and finally, the complete set installed in the hull. The hole in the end of the shaft is for a greasing point that I have to make, see below. I am not going to weld the arm to the shaft until I make the wheel axles and I don't think that I will do that until I have made a wheel. Only 9 more sets to make.
Attached Thumbnails
DSC04589.jpg   DSC04590.jpg   DSC04591.jpg   DSC04592.jpg  
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Armour in the Rhineland John McGillivray The Armour Forum 1 05-11-11 20:04
Armour id needed BSHEVLIN The Armour Forum 2 18-06-09 05:21
Old Armour in service matilda IIA The Armour Forum 19 11-03-09 12:11
Armour i.d. David_Hayward (RIP) The Armour Forum 8 14-09-07 11:27
Tim Tam Ice Creams!! David_Hayward (RIP) The Sergeants' Mess 2 23-09-05 04:08


All times are GMT +2. The time now is 22:23.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016