MLU FORUM  

Go Back   MLU FORUM > BUY, TRADE or SELL > For Sale Or Wanted

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-06-18, 20:58
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default C60L with double cab conversion

Remco Rommens of the Netherlands has an interesting Chevrolet C60L for sale. While doing a nut and bolt restoration he converted it with a double cab so he could take his family to enjoy the hobby too. Now time has come to move on and a good home is sought for his truck:

Quote:
For Sale: CHEVROLET C60L

Click image for larger version

Name:	DSCF4957 kopie.jpg
Views:	25
Size:	502.2 KB
ID:	100113

Roughly ten years ago rebuild from ground up:

The truck was taken apart to the last bolt and nut and everything was sand blasted and painted before rebuilding it with great care. New oil seals installed everywhere, bearings where needed. All electrical components were replaced and the truck now runs on a 12 volt system. The engine was rebuilt (216 qi engine as belongs in truck), new Michelin tires were installed, as were new brake linings and cylinders last year.

Converted to double cab to be able to enjoy the hobby with my children.

In the cargo compartment there are two fixed cabinets with drawers and two benches which give a lot of storage space. The benches can be converted in a bed where we normal sleep with two adults and one child. There is a fourth, small bed above the large bed for a second child which can be rolled away.

Truck drives wonderful and we did have a lot of fun with it over the years.

Reason for selling is me switching over to Jeep.

Price: 8,000.- Euro

Please contact Remco Rommens via email.

Click image for larger version

Name:	chevrolet  (188).jpg
Views:	15
Size:	656.7 KB
ID:	100109 Click image for larger version

Name:	chevrolet  (260) kopie.jpg
Views:	14
Size:	495.5 KB
ID:	100110 Click image for larger version

Name:	chevrolet  (247) kopie.jpg
Views:	11
Size:	502.6 KB
ID:	100111 Click image for larger version

Name:	IMG_0983.jpg
Views:	15
Size:	305.3 KB
ID:	100112
Reply With Quote
  #2  
Old 27-08-18, 11:36
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default

BTT...

Remco will take his C60L to the annual Keep Them Rolling event in the Eastern part of the Netherlands, 7-10 September (see http://www.twente-achterhoekweekend.nl/ for details).

Here is a picture of his C60L recovering a GMC at the same event in 2015 (source)

Click image for larger version

Name:	22279797515_e96bc54586_k.jpg
Views:	9
Size:	875.9 KB
ID:	101808
Reply With Quote
  #3  
Old 12-11-18, 20:48
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default

Remco asked me to post an update (automated translation by google):

Quote:
CHEVROLET C60L 1944
Price: € 6.500
Location:Franeker

Click image for larger version

Name:	45081511_2019099518154792_8000153724477505536_o.jpg
Views:	10
Size:	59.6 KB
ID:	103495 Click image for larger version

Name:	45080622_2019115348153209_3729286228709736448_o.jpg
Views:	9
Size:	63.2 KB
ID:	103496 Click image for larger version

Name:	45024623_2019114938153250_4197250472119107584_o.jpg
Views:	6
Size:	60.6 KB
ID:	103497 Click image for larger version

Name:	45103388_2019115948153149_8240668933821038592_n.jpg
Views:	6
Size:	33.9 KB
ID:	103498

CHEVROLET C60L built in 1944 with double cabin. This cabin is not original but very functional. Behind the front seats is a sofa and you can sit well with five adults in the cabin. There is plenty of cupboard space and two benches that can be built into a spacious double bed. We slept well with two adults and two children in the car.
Car is technically good and completely restored in 2009. Everything on the car has been separated from the last bolt and nut and repaired / replaced where necessary.
Fully blasted and again well-painted.
Engine is an original 216qi which belongs in this car. The engine has been overhauled and is now equipped with hardened valve seats.
In the entire car where necessary, the bearings are replaced and all oil times rings.
The radiator is equipped with a new inside work.
Brake servo remanufactured and currently not mounted.
A year and a half ago the brake drums were turned out and the brake shoes were fitted with new liners. Also the wheel brake cylinders were replaced.
The car is equipped with a 12 volt alternating current alternator and the rest of the electrical installation is also 12 volts. Halogen H4 headlights.
Car weighs about 3800kg so you need a truck driver's license.
The car comes with:
-Jute camouflage just over the bucket.
-Custom-made cushions for the couch / bed.
-Extra revised carburetor.
-2 spare lamp units as donated to the rear side.
-Extra coupling plate.
-Full set of universal joints for the drive shafts.
-3 times usable petrol can as on photo.
-Set extra heavier for springs.
-Extra gearbox (has been full of water)
-All other spare parts that I still have.
All in all a very nice (I think) technically good and great driving car.
Reply With Quote
  #4  
Old 01-04-19, 11:11
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default

Back to top

Click image for larger version

Name:	F4EF7AEB-99DF-4E3E-930C-3C779A1F3CDB.jpeg
Views:	8
Size:	201.6 KB
ID:	106336
Reply With Quote
  #5  
Old 02-04-19, 11:10
M.Morren's Avatar
M.Morren M.Morren is offline
Marty Morren
 
Join Date: Nov 2018
Location: Otterlo, The Netherlands
Posts: 72
Default Video

Here's a short clip of this truck from a video I made a while back. This is at the same time / place as the above photo.

https://youtu.be/0F2-0rLnmSU?t=1855
__________________
Marty Morren

My 1943 Chevrolet C8A HUM
Reply With Quote
  #6  
Old 02-04-19, 22:24
Alex van de Wetering Alex van de Wetering is offline
Moderator
 
Join Date: Mar 2003
Location: Hoofddorp, The Netherlands
Posts: 2,670
Default

Just out of interest.....is the front section of the cargo body still present, in case any potential buyer would want to convert the truck back to stock?

Alex
__________________
Chevrolet C8 cab 11 FFW
BSA Folding Bicycle
Reply With Quote
  #7  
Old 11-10-19, 22:51
Alex van de Wetering Alex van de Wetering is offline
Moderator
 
Join Date: Mar 2003
Location: Hoofddorp, The Netherlands
Posts: 2,670
Default

Sad to see that the truck hasn't found a new home yet.

I don't know if Remco is a member here(?), but it could help to know if the crew cab conversion can be easily converted back to stock. Maybe that can convince any potential buyer to step forward.

Alex
__________________
Chevrolet C8 cab 11 FFW
BSA Folding Bicycle
Reply With Quote
  #8  
Old 12-10-19, 10:06
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default

Quote:
Originally Posted by Alex van de Wetering View Post
Sad to see that the truck hasn't found a new home yet.

I don't know if Remco is a member here(?), but it could help to know if the crew cab conversion can be easily converted back to stock. Maybe that can convince any potential buyer to step forward.
Remco has an account. The cab conversion is well executed, best way to go would be to fit another cab I guess?

The body was shortened also because it was rusty. As it is simple in construction it should be possible to put a section back in.

Click image for larger version

Name:	BC038651-FCF4-4028-AA9B-01B513BCB4B0.jpg
Views:	4
Size:	425.2 KB
ID:	109483

Click image for larger version

Name:	8DDC931D-832B-49B0-9E64-07DFC82A416C.jpg
Views:	3
Size:	1.05 MB
ID:	109484
Reply With Quote
  #9  
Old 23-10-19, 18:38
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default Sold

I am happy to report that this C60L was sold to Henrik Guldmann in Denmark through my intervention. Somehow I felt Remco needed help to find a new home for his quirky CMP, if only because of the amount of work which he put into it (which otherwise could have gone to waste).

What better than a new owner who wanted to convert a C60L with a double cab as well. Henrik's CMP can now be saved from modification to be restored sometime later.

H.
Reply With Quote
  #10  
Old 23-10-19, 21:15
Phil Waterman Phil Waterman is offline
Moderator
 
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,927
Default Wonder if?

Hi Hanno

Good news about the new home. Wonder if they could put a long recording GoPro in the cab while it makes the trip Denmark?

Cheers Phil
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted: Double pulley Petr Brezina For Sale Or Wanted 0 30-11-15 20:39
For Sale: Double V belt pulley peter simundson For Sale Or Wanted 1 22-07-14 17:12
Double parked Ansons cletrac (RIP) WW2 Military History & Equipment 18 01-11-08 20:49
COE double cab 6X6 sapper740 The Softskin Forum 5 27-04-08 12:38
Sherman with double Bren mount Hanno Spoelstra The Armour Forum 5 23-01-07 17:09


All times are GMT +2. The time now is 12:34.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016