#1
|
|||
|
|||
Ford Late Wiring Diagram
This diagram is found in our F15A and other FAT , both 1945 .
Applicable to vehicles built after June 1, 1945 http://www.surfacezero.com/g503/data...45_-_copia.jpg With 6 switch plate in panel http://www.surfacezero.com/g503/data...43_-_copia.jpg Add in Waterproff distributor can look in diagram (great addition i think...) http://www.surfacezero.com/g503/data...23_-_copia.jpg Regards
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#2
|
|||
|
|||
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#3
|
||||
|
||||
Files now uploaded
Quote:
I've uploaded your large resolution files here: https://photos.app.goo.gl/JJkheAKtwcycqBpw5 Great stuff!
__________________
Regards, Hanno -------------------------- |
#4
|
|||
|
|||
Thanks Hanno for uploading the file.
I think this diagram will answer many questions and also create new questions. The novelty for me is the distributor's waterprofing system. At least here in the forum, I never read any comments about that accessory. Regards
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#5
|
||||
|
||||
Quote:
Here’s another picture of the waterproofed distributor (NMP):
__________________
Regards, Hanno -------------------------- |
#6
|
|||
|
|||
Thanks Hanno!
What is the meaning of NMP ? The wadeproof box are in this diagram
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT Last edited by m606paz; 04-02-21 at 00:13. |
#7
|
||||
|
||||
"Not My Picture" - in other words "I found this picture on the interweb somewhere I can't remember"
__________________
Regards, Hanno -------------------------- |
#8
|
|||
|
|||
Another rare part found.... Aug 14 1945 the date.... listed on wiring and wadeproof diagram
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT Last edited by m606paz; 04-02-21 at 00:14. |
#9
|
|||
|
|||
The same wadeproof box in this topic: http://www.mapleleafup.net/forums/sh...ad.php?t=31281
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#10
|
|||
|
|||
Another post with info about wadeproof box
http://www.mapleleafup.net/forums/sh...ad.php?t=19241
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#11
|
|||
|
|||
More info
http://www.mapleleafup.net/forums/sh...&postcount=120 Can anyone help me contact Van Hove Herman and request a scan of the FWP 1 FORD CANADA, ILLUS., PARTS LIST SPECIAL WADEPROOF EQUIPMENT for CDN Mil. Pattern Vehicles. (Jun.'45)manual? It is very important for me to have in detail the parts listed in this manual! Thanks in advance!
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#12
|
||||
|
||||
Go this member profile and use the send message function
http://www.mapleleafup.net/forums/member.php?u=1700
__________________
Regards, Hanno -------------------------- |
#13
|
|||
|
|||
Hi Hanno,thnks for your help!
Days ago I sent a PM to Herman, but I still have not had a reply. Maybe some of the members have had direct contact with him, so I asked if they could help me to contact him. Regards
__________________
Mariano Paz Buenos Aires, ARGENTINA 1944 Ariel W/NG 1945 FGT FAT |
#14
|
|||
|
|||
Late War Ford CMP Wiring Diagram
Quote:
I revisited your diagram this week to check my wiring on my late war round gauge panel. All wire sizes agreed except one in my original harness I used for a pattern. No. 24, resistor to coil, on my harness is 16 gauge but listed as 14 gauge on your data plate. Interestingly the wire to the resistor, No. 16, is 16 gauge and the wire from the coil to the distributor is also 16 gauge. Why 14 gauge in the middle I wonder? I was able to correctly label wires 30 and 30A instead of 30A and 30B which I used based on an earlier wiring diagram showing a voltage gauge instead of an ammeter which is used on the round gauge panels. In the case of the ammeter equipped the current goes from the solenoid, through the meter, to the battery terminal on the regulator. On the voltmeter equipped it goes directly to the regulator from the solenoid. Many thanks again for posting it. Nice to confirm my wires go where they should and are the correct gauge. Cheers,
__________________
F15-A 1942 Battery Staff Jacques Reed |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1945 Ford Late Lubrication Diagram | m606paz | The Softskin Forum | 0 | 26-09-20 10:12 |
Wiring Diagram | Ganmain Tony | The Softskin Forum | 15 | 02-04-17 04:07 |
Mk1 Wiring diagram | Jordan Baker | The Carrier Forum | 2 | 16-04-08 07:13 |
wiring diagram for Ford 8-cwt | peter simundson | The Softskin Forum | 1 | 20-02-07 15:51 |
engine wiring diagram | alleramilitaria | The Carrier Forum | 4 | 19-08-04 17:24 |