#61
|
||||
|
||||
Very nice Mike! Great work on this unique vehicle.
__________________
1953 M37 CDN 1953 M38A1 CDN 1967 M38A1 CDN2 |
#62
|
|||
|
|||
Pretty much done ...
Bled and adjusted the brakes, did several touch-ups to the paintwork, adjusted the accelerator linkage to hit maximum with the pedal stopped against the floor, and took GP 8920 for a short drive up and down our street.
Still chasing a charging - or rather, lack thereof - problem and rough running issues, but the vehicle is pretty much completed, at least within my limited capabilities and budget. Not concourse standard, but I'm reasonably happy with the result. Mike |
#63
|
||||
|
||||
Looking good Mike, well done
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
#64
|
||||
|
||||
Looks great Mike!
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern |
#65
|
||||
|
||||
Looks great Mike! Im sure you will get the bugs worked out now that you have nice evenings to tinker with it between test drives.
__________________
1953 M37 CDN 1953 M38A1 CDN 1967 M38A1 CDN2 |
#66
|
|||
|
|||
Thanks
Thanks, Gents, for your comments.
Mike |
#67
|
|||
|
|||
Grrrr ... one step forward, two back ...
Spent some time over the last day or so chasing down my charging or rather lack of, issues. Turns out the generator was producing nothing, ... zilch, ... zip. And that from an expensive, supposedly fully rebuilt generator.
Took it to the auto elec wizard to be told the field coils are cactus and it will need an expensive rebuild!! Now what could have caused that? The generator was wired into the circuit as per the wiring diagram from Vintage Wiring of Maine, but never worked, so it seems it was cactus from day one. My biggest concern is that I may have done something wrong and caused the problem, but I don't know what, and don't want to repeat the process. Unfortunately, the company that did the original work went out of business/business changed hands, and the new owner understandably takes no responsibility, so just have to swallow hard and fork out yet another bunch of $$ for the same item. Should be back in a week, and I'll do a test before I re-install it, and check the wiring connections. Oh well ... Mike |
#68
|
||||
|
||||
Quote:
Maybe there was a good reason why that company went out of business and you have now found out. What we in the trade called a "paraffin overhaul", in other words, washed off and painted, then returned.
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
#69
|
||||
|
||||
Quote:
Residual magnetism in the generator Field Coils is necessary for the Generator to build up any voltage during start-up. Full output is not necessary if the battery has sufficient charge to crank the engine. Once the engine is running, voltage flowing through the Genny will reform the full magnetic field. To restore the small amount of residual magnetism necessary to begin voltage buildup, connect either a 6 or 12 volt battery (not dependant on the voltage of the Generator, we are just using DC to create an electromagnet) to the Field Coils while the generator is at rest, as follows: If the Generator is still in the vehicle, remove Field wires F+ and F- from the Generator. Sometimes, one of these will be marked "Ground" instead (depending on polarity. In a Jeep, it will be Neg Ground. Some Fords, like CMPs, were Pos Ground). CAUTION: If still in the vehicle, failure to isolate the Field leads from the regulator during flashing procedures can damage the regulator. Measure the Field Coil resistance from the F+ to the F- terminal (or "Field" and "Ground"). You should be able to read some resistance as you are measuring a continuous winding, but we are looking for a continuous circuit. An infinite resistance reading would indicate damaged Field Coils, needing replacement. Also check to be sure there is no short to Earth from either terminal to the body of the Generator. Connect F- (or "Ground") to the Negative terminal of the battery. Using an insulated cable like a jumper lead or spare battery cable connected to the Battery Positive terminal, hold it to the Field+ (or "Field") post on the Generator for about 5 to 10 seconds, then remove. (NOTE: for Positive Earth vehicles, reverse these connections!). This will reform a small magnetic field in the Field Coils. Small cheat, if the Generator is still in the vehicle, instead of connecting to terminals on the battery, you can use the "Batt" post on the Generator and a good Earth on the engine block to do this, but be familiar with the polarity of the vehicle's electrical system. Reconnect F+ and F- to the regulator. Start the engine and check if the Generator is producing any output charge.
__________________
You can help Keep Mapleleafup Up! See Here how you can help, and why you should! |
#70
|
|||
|
|||
Thanks
Thanks Tony, great info that I'll print out and keep it with my other data/info. Very useful!
The Ford GP is a positive ground system, similar to many (all?) Fords of the period. It's the GPW that is negative ground, as per the Willys build spec. The rebuilder - the current one, not the first one - told me the field coils were 'burned out' whatever that actually means. As the generator has only had 6V, Pos ground, put through it since I have had it, I suspect a 'paraffin overhaul', as Richard put it. There have been a few instances during the GP build where I consider I've been taken for a ride. Expensive suspension bushes that didn't fit, 'repro' fan belts that turned out to be standard Mitsubishi with the label inked over and which rubbed-off at first use, and now a generator rebuilt with a puff of black paint and an invoice!! Oh well, such is life ... Mike |
#71
|
||||
|
||||
9n
Is it a 3 brush gene ? They usually have a manual voltage adjuster Think the 9N tractor has the same gene , if that's the case a replacement should be easier to find.
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike Kelly; 19-04-21 at 04:00. |
#72
|
||||
|
||||
New Gene
Not sure if this new gene is suitable . Might need the pulley changed over to suit a GP
https://www.amazon.com/DB-Electrical.../dp/B00Q8LRV98 https://www.dbelectrical.com/product...0002-5792.html
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#73
|
|||
|
|||
GP Generator
Hi Mike,
Unfortunately, the Ford GP generator body has an extra bracket welded to it, which makes it unique to the GP. A Ford 9N tractor generator will not mount onto the engine without being converted with the extra bracket. Be a nice, quick and cheap way to overcome the problem if it did fit. Thanks for the suggestion. Mike |
#74
|
||||
|
||||
Quote:
Please bare in mind that the following suggestion is borne out of total ignorance ... Would it be possible to gut a new Ford 9N generator as Mike suggested, and fit it into a stripped out old GP case? It would void any warranty on the new generator though. Kind regards Lionel
__________________
1940 Chevrolet MCP with Holden Built Cab (30 CWT). 1935 REO Speed Wagon. 1963 Series 2A Army Ambulance ARN 112-211 Series III ex-Military Land Rovers x 2 |
#75
|
|||
|
|||
Hi Lionel,
I assume the internals are the same and available, hence the ability of the auto elec to rebuild with new replacement parts. I'm no auto electrician, so rely on his expertise. Hopefully, this time it will be right!! Mike |
#76
|
|||
|
|||
Charging issue
Years ago I repaired the charging system on a 1948 Ford the cutout points in the voltage regulator fused and burnt out the generator. With the back feed from the voltage regulator the generator was trying to act like an electric motor but it obviously wasn’t powerful enough to roll the engine and overheated. I would suggest leaving the fan belt off of the generator when connecting the battery. If the generator tries to turn you have a problem.
|
#77
|
||||
|
||||
History
The 9N tractor gene info might help your auto electrician
https://www.google.com/url?sa=t&sour...JH31e3KvL5gh3J P.S. I had a look at the GP service manual. The GP gene is a 2 brush type gene - B circuit , with internally grounded field coils.
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike Kelly; 19-04-21 at 19:33. |
#78
|
|||
|
|||
Thanks
Thanks Paul and Mike,
All very helpful. I'll certainly be doing some checks this time before I fire the system up. Mike |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A slow way to remove paint | Keith Webb | The Restoration Forum | 2 | 24-09-12 08:14 |
Australian Army Ford D Series truck | Wayne Henderson | Post-war Military Vehicles | 7 | 17-09-08 04:26 |
Off Topic..slow day... | Alex Blair (RIP) | The Sergeants' Mess | 2 | 01-08-07 19:00 |
New life or slow death | Keith Webb | The Softskin Forum | 0 | 07-05-07 14:32 |
Slow day on the forum.... | Alex Blair (RIP) | The Sergeants' Mess | 16 | 01-09-06 04:55 |