MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Carrier Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 10-12-13, 10:31
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default New UCW project

Hello all, if it seems to be rather impossible to make a new registration on the MLU forum, I am sending few pics in behalf of my friend Petr, owner of the new UCW project over here. Hope you will like it. A lot of work ahead, but apart from cutted armor, all main components are present. Dont have serial number, but we think that its MK.II late production (british made?) or Mk.III? It seems that it have Mk.III air inlets and motor cover (well remains of it). Any comments would be appreciated.
I also wonder if there are any other owners of similar UCWs (not AOPs)?
And if there will be a chance to make a registration for Petr, it would be much easier for him to keep him updated about the project progress
Thanks and regards
Duson
Attached Thumbnails
carrier1.jpg   carrier2.jpg   carrier3.jpg   carrier4.jpg   carrier5.jpg  

__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #2  
Old 10-12-13, 10:48
Ron Pier's Avatar
Ron Pier Ron Pier is offline
Registered User
 
Join Date: Apr 2009
Location: Poole. UK
Posts: 1,253
Default

Hmmm! Someone else told me that they gave up trying to register for this site?? Anyway here is my MK2* from 1944. Ron
Attached Thumbnails
Carrier 001.jpg   Carrier 008.jpg   Carrier 004.jpg  
Reply With Quote
  #3  
Old 10-12-13, 13:54
Michael R. Michael R. is offline
Registered User
 
Join Date: Jun 2011
Location: Canada
Posts: 1,154
Default

Good to hear from you Dušan. Is that British welded hull construction Petr has there?
There are a number of indicators other than the obvious welded hull and lack of rivets with supporting angle iron brackets.

I am noticing the steering gearbox, driver seat upper bracket, solid (i.e.: non-cast) Stacey attachment, cable access opening through divisional wall near driver right elbow.
Can you post some engine detail images? You may find a serial number on the block.

Once it is restored it will make a nice compliment to the mortar carrier and outstanding Windsor Carrier your group has access to at the Military Technical Museum Lešany.

Last edited by Michael R.; 14-12-13 at 22:24.
Reply With Quote
  #4  
Old 10-12-13, 14:49
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

The details you mentioned are pointing to british made UCW, am I right? Sorry for poor pics, but you got all the clues!
What do you think about the air inlets / hole in the division plate? I suppose its Mk.III style, however I have seen Mk.II with this style of inlets. A bit confusing
Petr will send better photos incl. engine number, hull number etc. asap. (there is a 24 studs engine).
Thanks for comments!
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #5  
Old 10-12-13, 16:04
Michael R. Michael R. is offline
Registered User
 
Join Date: Jun 2011
Location: Canada
Posts: 1,154
Default

So many items point to British manufacture, including the water can rack. The part numbers off the brackets may also support this. The divisional wall may indicate a lack of fastening holes for the ventilator boxes, pointing to a MK-III welded hull.

Last edited by Michael R.; 11-12-13 at 04:54.
Reply With Quote
  #6  
Old 10-12-13, 16:13
Ben Ben is offline
Registered User
 
Join Date: Jul 2010
Location: UK
Posts: 544
Default

I think MR is correct. British steering wheel and what looks like a bishops steering gear. British steering wheels are very hard to find in any condition, that one looks very good. Nice project, upper armour is pretty straight forward, looks like most of the frame is still there too.

Ben
Reply With Quote
  #7  
Old 10-12-13, 17:43
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,059
Default

Yep agree welded hull, mk3 it has the removable glacis plate section for the pedals too.
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #8  
Old 10-12-13, 20:15
shaun shaun is offline
Registered User
 
Join Date: Feb 2009
Location: uk
Posts: 528
Default

That's a really nice project , should be on the road in no time . Arnhem next year ??????
__________________
Shaun Hindle

Morris C8
Ford GPW jeep 1945
Morris 1000 (ex mil)
SAS LSV
Harley Davidson MT 350 motor cycle
Universal carrier MK 1*1943 Ronson (under restoration)
Universal carrier MK 2* 1944 (Puddle Jumper HSK 345)
Ferret MK 1/1 1956
Ferret MK 2/4 1958
CVR(T) Scorpion
432 MK2
Daimler MK1 armoured car 1943
(winner best wheeled armour W&P show 2011)
Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011)
Fordson WOT 3 D 1940 (awaiting restoration )
Reply With Quote
  #9  
Old 10-12-13, 21:11
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

Thanks for all the nice comments!
Will see, it all depends on the spare time. Hopefuly it became a runner soon. Perhaps Petr could tell you more - if he will be ever allowed to join the forum? Hanno, please!
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #10  
Old 15-12-13, 11:01
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

Here are some promised pics of welded Mk.III's in use of Czechoslovak Independent Armoured Brigade Group in UK and in the Europe 1944-45. I would say these are the same type as Petr's.
Hope you will find them interesting (photos by T.Jambor).
Would like to ask you guys, if here is anybody who owns the same british made welded UC? Thanks!
Attached Thumbnails
1m.jpg   2m.jpg   3m.jpg   4m.jpg   5m.jpg  

__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #11  
Old 15-12-13, 11:26
Ben Ben is offline
Registered User
 
Join Date: Jul 2010
Location: UK
Posts: 544
Default

Lynn Eades owns a welded hull MKIII I think?? I know he's off line for a few days but Im sure he'll let you know when he's back, not sure if it's British or Canadian.

Ben
Reply With Quote
  #12  
Old 15-12-13, 13:37
Marc van Aalderen's Avatar
Marc van Aalderen Marc van Aalderen is offline
Registered User
 
Join Date: May 2009
Location: Veenendaal, The Netherlands
Posts: 481
Default

This one was fore sale a couple of years ago here in the Netherlands. Never saw it again after it's sale to a new owner.

Click image for larger version

Name:	P4170068.jpg
Views:	104
Size:	91.7 KB
ID:	62121

Cheers,
__________________
Marc van Aalderen

Daimler Dingo Mk1B 1941
Daimler Armoured Car Mk1 1943
Daimler Ferret Mk1/1 1959
Ford Universal Carrier No2 MkII* 1944
Ford GPW British Airborne 1944
Lightweight 10 Cwt Trailer SS Cars Ltd 1944
Anti-Tank Gun 6 Pdr 7 Cwt MkII 1942
Daf Trailer YAA602 1954
Daf Trailer AT16-24-1NL 1977
Daf 2100Turbo 1982
Reply With Quote
  #13  
Old 15-12-13, 16:38
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

Thanks both!!
I have seen pics of the "Dutch" one on the forum and in fact its the only one such restored carrier (now missing ) I found so far. Anyone knows where it is now?
I am surprised, it seems that they are pretty rare. Hopefuly this is not the only one survived on the forum...
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #14  
Old 15-12-13, 21:02
Nigel Watson's Avatar
Nigel Watson Nigel Watson is offline
British Indian Army
 
Join Date: Feb 2003
Location: Caledonia, (Scotland)
Posts: 488
Default Great project

I notice the interesting double back shelf arrangement. Is it original do you think? Are the Stacey attachments in the correct holes?

Great to see another carrier in Czech land! Brilliant.
__________________
He that blaws in the stour fills his ain e'en


1942 Ford Utility 11YF
1942 10cwt GS Trailer
Reply With Quote
  #15  
Old 15-12-13, 21:27
shaun shaun is offline
Registered User
 
Join Date: Feb 2009
Location: uk
Posts: 528
Default

Quote:
Originally Posted by Dusonn View Post
Here are some promised pics of welded Mk.III's in use of Czechoslovak Independent Armoured Brigade Group in UK and in the Europe 1944-45. I would say these are the same type as Petr's.
Hope you will find them interesting (photos by T.Jambor).
Would like to ask you guys, if here is anybody who owns the same british made welded UC? Thanks!
I restored a welded hull many years ago ( it's now in Greece ). You will be pleased to know they are a lot easier to restore than the riveted carriers. There are several differences ... Engine covers, fuel tanks and air intake to name a few.
__________________
Shaun Hindle

Morris C8
Ford GPW jeep 1945
Morris 1000 (ex mil)
SAS LSV
Harley Davidson MT 350 motor cycle
Universal carrier MK 1*1943 Ronson (under restoration)
Universal carrier MK 2* 1944 (Puddle Jumper HSK 345)
Ferret MK 1/1 1956
Ferret MK 2/4 1958
CVR(T) Scorpion
432 MK2
Daimler MK1 armoured car 1943
(winner best wheeled armour W&P show 2011)
Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011)
Fordson WOT 3 D 1940 (awaiting restoration )
Reply With Quote
  #16  
Old 16-12-13, 11:48
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

Quote:
Originally Posted by Nigel Watson View Post
I notice the interesting double back shelf arrangement. Is it original do you think?
You mean these leather straps on the left side in the rear compartment? Actualy there are 4 of them. I think they are genuine and hopefuly they could tell us what was the original purpose/stowage layout of this particualr carrier. One theory is that they are for MMG ammo boxes. I was checking all available stowage diagrams and I am not sure... Found one with such straps (attached pics.), but have no idea if its it and what it was exactly for.

Quote:
Originally Posted by shaun View Post
You will be pleased to know they are a lot easier to restore than the riveted carriers.
Yes, thats right and we are glad of it
Attached Thumbnails
stowage.jpg  
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #17  
Old 16-12-13, 22:05
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default

Quote:
Originally Posted by Dusonn View Post
Perhaps Petr could tell you more - if he will be ever allowed to join the forum? Hanno, please!
Dusan,

He's on the waiting list. Sorry, I am very busy but hope to process all new applicants during the Christmas holiday. So have a little more patience, please ...

Hanno
Reply With Quote
  #18  
Old 17-12-13, 09:57
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

Thank you Hanno, no problem!
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #19  
Old 18-12-13, 00:11
Nigel Watson's Avatar
Nigel Watson Nigel Watson is offline
British Indian Army
 
Join Date: Feb 2003
Location: Caledonia, (Scotland)
Posts: 488
Default Rear shelf

Quote:
Originally Posted by Dusonn View Post
You mean these leather straps on the left side in the rear compartment? Actualy there are 4 of them. I think they are genuine and hopefuly they could tell us what was the original purpose/stowage layout of this particualr carrier. One theory is that they are for MMG ammo boxes. I was checking all available stowage diagrams and I am not sure... Found one with such straps (attached pics.), but have no idea if its it and what it was exactly for.


Yes, thats right and we are glad of it
Hi Dusan
It was the shelf along the back I was meaning. It looks as if it may have been added later and slots cut for the rear lifting eyes......or not! The back shelf on carriers usually folded down where it met the track mudguards at the back. Interesting though.
Nigel
__________________
He that blaws in the stour fills his ain e'en


1942 Ford Utility 11YF
1942 10cwt GS Trailer
Reply With Quote
  #20  
Old 18-12-13, 14:01
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

I see now!
It seems to be the same shelf as seen on "the Dutch" one carrier (mentioned in Marc van Aalderen's post above) - please see detail. I would say these two carries are pretty similar ("the Dutch" one is marked No.1 Mk.IIW though).
Possibly late production variant?
Attached Thumbnails
backshelf.jpg  
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #21  
Old 30-12-13, 22:16
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

In behalf of Petr (hopefuly he will be able to write a posts on his own soon):

"Nice present under my Xmas tree - two bins over the gasoline tanks. In perfect condition, original color, original stencils. Great addition to my carrier. Thank you, Santa "
Attached Thumbnails
bedna1.jpg   bedna2.jpg   bedna3.jpg  
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #22  
Old 06-01-14, 22:31
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

Gentlemen, again one silly question regarding Petr's carrier: Have you ever seen such oil cooler on the UC's? I know the common "tube" type, but now I am talking about the very late carrier's production. Perhaps there was a design change (U.S. GAEA Ford engine)?
Thanks a lot for opinions!
Attached Thumbnails
cooler1.jpg   cooler2.jpg  
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #23  
Old 16-02-14, 21:22
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

In behalf of PetrB:
"Today I got surprised by my carrier (first but certainly not the last time )
I spent many hours trying to take out pulley from the generator. When I had almost gave up (and partialy damaged pulley and shaft) I accidentaly found out that this generator has threaded pulley instead of usual woodruff key.
Its Ford Canada 6V 32A generator.
So beware! "
Attached Thumbnails
generator.jpg   generator1.jpg   generator2.jpg  
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #24  
Old 22-02-14, 15:16
Dusonn's Avatar
Dusonn Dusonn is offline
Dusan Klavik
 
Join Date: Feb 2008
Location: Czech Republic
Posts: 184
Default

In behalf of PetrB:
" Would like to ask you for an advice: What is the scale of the contract No.'s for the british made Mk.IIIw universal carriers from 1944-45? If its known...
Many thanks for help in advance!
Petr"
__________________
Czechoslovak Army 1915-1945. Czechoslovak Independent Armored Brigade Group in Great Britain, Czechoslovak Army in Middle East.

1938 Standard Flying 12 Staff Car
1943? Ford FGT cab.13 project
180 gall WWII water bowser project
1942 Fordson WOT8 project

www.rotanazdar.cz
Reply With Quote
  #25  
Old 08-03-14, 22:39
Petr Brezina Petr Brezina is offline
Registered User
 
Join Date: Mar 2014
Location: Czech Republic
Posts: 533
Default

Hello all, I'm in - thank you Hanno!!!
Happy I can join this great forum and share with you my project's updates.
I'm slowly getting there, some parts primed, some repaired, currently working on the transmission (still waiting for new reverse idler gear) and carburetor. Lot of work ahead but it's a part of fun, right?
Attached Thumbnails
progress1.jpg   progress3.jpg   progress2.jpg  
__________________
UCw Mk.III
Reply With Quote
  #26  
Old 09-03-14, 00:39
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default

Hi Petr, Welcome to the forum.
I have a British MkIII Armoured O.P. (AOP)
The MkIII had no air duct (scoop)
Mine has the same access plate at the front as yours.
You have some parts that I don't know, and 1 I would like measurements from (the wiring cover in the first photo,on the left)

Would you be able to post photos of the engine bay?
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....

Last edited by Lynn Eades; 09-03-14 at 13:05.
Reply With Quote
  #27  
Old 09-03-14, 12:32
Petr Brezina Petr Brezina is offline
Registered User
 
Join Date: Mar 2014
Location: Czech Republic
Posts: 533
Default

Surely, no problem, will send you dimensions a detailed photos. Do you mean this one - marked with arrow?
Check pics - this is all I have got from the engine covers.
Attached Thumbnails
cover.jpg   engcover1.jpg   engcover2.jpg  
__________________
UCw Mk.III
Reply With Quote
  #28  
Old 09-03-14, 13:13
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default

Hi Petr (correct this time) that is the one. The cover for the cables beside the driver.
Have you established where your carrier was made yet? (Canada or U.K.)
I would like to see a photo of the engine bed rails.
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #29  
Old 09-03-14, 13:31
Petr Brezina Petr Brezina is offline
Registered User
 
Join Date: Mar 2014
Location: Czech Republic
Posts: 533
Default

I see, sorry, dont get it. Pic added. I would say its UK made.
Attached Thumbnails
bay.jpg  
__________________
UCw Mk.III
Reply With Quote
  #30  
Old 09-03-14, 23:04
Petr Brezina Petr Brezina is offline
Registered User
 
Join Date: Mar 2014
Location: Czech Republic
Posts: 533
Default

Done. Must say it again - this carb is just beautiful piece of engineering. Im looking forward to the connecting and setting
Attached Thumbnails
carb6.jpg  
__________________
UCw Mk.III
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New Project ron The Carrier Forum 3 17-07-17 22:00
A new project Tim Lovelock The Softskin Forum 15 17-07-12 13:58
FGT project Tony Wheeler The Restoration Forum 38 12-07-12 06:09
Project F15 Howard The Softskin Forum 162 07-02-09 07:47
FOR SALE/TRADE: 1944 CHOREHORSE PROJECT for Signal Corps Wireless Power Unit Project Alain For Sale Or Wanted 1 21-02-07 00:11


All times are GMT +2. The time now is 16:42.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016