For Sale: Bedford instruction plates.

[John A. Rippingham]

Hello,

I have has a batch of instuction plates made for the bedfords. Fitted to MW, OX, OY, and QL available in two finishes as shown. Proffesionaly printed on aluminium.




£15 for any of the small pates, and £20 for the big bedford chassis plate. plus postage.

[Hanno Spoelstra]

Nice!

H.

[hans prijs]

Originally Posted by John A. Rippingham

I have has a batch of instuction plates made for the bedfords. Fitted to MW, OX, OY, and QL available in two finishes as shown. Proffesionaly printed on aluminium.

wich plates do i need for a 1944 bedford mwd

regards hans

[John A. Rippingham]

Hello Hans,

You should have, one choking plate on the dash board, one coolant drainage plate on the steering collum support bracket, and the smaller chassis plate on the bulkhead. For the coolant drainage and the choking plate either black or white is ok, there was no particular order to the colour just some were black and some were white.

This is the early dash in my truck, but the choking plate is in the same place on later trucks, sometimes in the middle, or the other side above the choke, but always at the top.



The drainage plate on the steering collum

Where the red plate is in this truck, the chassis plate should be. The plate below it is the lubrication plate, my next project once i have sold a few of these.
Have a look and see if you can find the holes.

Hope that helps

John

[hans prijs]

Originally Posted by John A. Rippingham

Hello Hans,

You should have, one choking plate on the dash board, one coolant drainage plate on the steering collum support bracket, and the smaller chassis plate on the bulkhead. For the coolant drainage and the choking plate either black or white is ok, there was no particular order to the colour just some were black and some were white.

Attachment 69126
This is the early dash in my truck, but the choking plate is in the same place on later trucks, sometimes in the middle, or the other side above the choke, but always at the top.
Attachment 69124
The drainage plate on the steering collum
Attachment 69125
Where the red plate is in this truck, the chassis plate should be. The plate below it is the lubrication plate, my next project once i have sold a few of these.
Have a look and see if you can find the holes.

Hope that helps

John

thanks a lot for the info
i an take a look tomorow of i can find some holes in my bedford
maybe i wil order a set of the plates

hans