1939-41 Ford Radiator help needed

[cliff]

Hi All,

can anyone help with the overall height, width and thickness of a radiator for the above Ford 30cwt and 3 ton vehicles?

The same measurements are required for the Ford Marmon Herrington conversions for those years as well. I have been told the M/H had a radiator and shoud about 4inches deeper then standard.

Thanks in advance

[Mrs Vampire]

I am in need of a spare so thought the best bet was to get an aluminium replica made. I am going to draw up mne so will send dimentions as soon as I can .\

[leo tomaiolo]

don't know if this helps, but i saw this awhile ago. my 41 ford with the marmon conversion uses the same radiator and shroud as the standard 2 wheel drive frame. that's for a standard production cab.there are two different types of radiator that i've seen a early low and a late high style. early one's split and the late has no hole (split) i have both type's if you still need dimensions let me know.

[cliff]

Originally Posted by leo tomaiolo

i have both type's if you still need dimensions let me know.

Hi Leo. Yes I still need the correct sizes of the radiators. I had to shelve my project for a while but have got it on the table again now.

Many Thanks

[jack neville]

I will measure mine and send you some photos of the shroud Cliff. You are correct they are about 4" taller in the Aussie MH models

[cliff]

Originally Posted by jack neville

I will measure mine and send you some photos of the shroud Cliff. You are correct they are about 4" taller in the Aussie MH models

Thanks Jack I appreciate your help.