#1
|
|||
|
|||
carter w1 main jet# for 216
Anyone would happen to know what is the main jet # for the carter W1 for a 216 ?
some morron welded stuff in ours and drilled it back and i cannot read the size number anymore so that complicates a bit the "rebuild" of the carb... i found several diagrams and various info but nothing specific to the # jetting fwiw i have a 69-44 rod so its the "standard" one, not the leaner one. at last if i could get a picture of one not welded and the diameter of the orifice i could probably fix it properly... thanks for any info. |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
Which W-1
Hi
Glad you found the information you were looking for, a question which W-1 do you have the early or late? One has a tin top (carb on the left) the other (carb on the right) has a cast pot-metal top. A quick look at the carb sheet link you posted, I didn't spot if there was a difference depending on the application car vs heavy truck. Also going to the part sheet what number part were you looking for? Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#4
|
|||
|
|||
hi, i have the one with the metal cover and stamped 365 under the casing.
among the 3 or 4 manuals i found like the one in the link, they all refer to a 0,095" diameter orifice of the main jet. there is no pn found for that jet specifically so i fabricated*one. works like a champ. |
#5
|
||||
|
||||
Hi, I have a reconditioned Carter W1 ready to fit complete, Want £150 for it, I am located in the uk.
kevin.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008. 3" Mortar Universal Carrier 1943 registered 06/06/2009. 1941 Standard Mk1 stowage Carrier, Caunter camo. 1941 Standard Mk1 stowage Carrier, light stone. 10 cwt wartime mortar trailer. 1943 Mk2 Daimler Dingo. 1943 Willys MB. 1936 Vickers MG carrier No1 Mk1 CMM 985. |
#6
|
|||
|
|||
Quote:
regards. |
|
|