#1
|
|||
|
|||
Sexton 1891
Hello guys, my name is Allen Bryant. After almost six years of toiling away on my Sexton II SPG, I thought I would share some pictures. I bought this Sexton from Byron Morris with SECO in Augusta, Georgia in February of 2002 and it sat in my side yard untouched until March of 2010 when I began restoration. I am approximately 85% finished with the restoration now and I will post pictures of my project over the next few days and weeks.
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#2
|
||||
|
||||
Look forward to seeing your posts Allan, You can probably lend fellow member Ron Cheney some advice as he begins his Sexton restoration
John |
#3
|
|||
|
|||
Don't keep us waiting!!!
|
#4
|
|||
|
|||
Disassembly
I started by removing the R975C4 engine and began disassembling it. As I took it apart I bagged and labeled every single piece which was extremely helpful during reassembly. I also took an extraordinary number of pictures throughout the process which were priceless.
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#5
|
|||
|
|||
Engine Assembly
Once I had cleaned, painted and replaced/rebuilt all worn parts I began the reassembly process. I used the rebuilding manual for the most part, but I also received some very valuable information from Jesse Browning who provided a lot of key information especially in wiring the magnetos to the correct cylinder.(The manual is not as clear as it could be in this area.)
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#6
|
|||
|
|||
Very nice work Allen!
|
#7
|
|||
|
|||
Startup
I was able to start the engine in April 2012 and ran it on its test stand a total of four and half hours over two weekends. It started right up when I hit the starter button, but I did have to adjust the air idle lever on the front of the carb to get it to idle properly. I have post a video of the engine running on YouTube at the link below.
https://www.youtube.com/watch?v=1qsJlBd8a9E
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#8
|
|||
|
|||
Thanks! Jesse.
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#9
|
|||
|
|||
After I finished the engine I began work on the chassis by removing the gun and everything that would unbolt. I did not however, separate the transmission and cross drive from the chassis or completely disassemble the suspension. Once I had removed all I could, I sand blasted the chassis inside and out. (On a side note, I did this in the summer and fall of 2012 which was one of the worst drought years in Oklahoma history, but it rained on me at least a little every time I sand blasted without fail. I still haven't figured that out. )
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#10
|
|||
|
|||
More pictures.
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#11
|
|||
|
|||
And more pictures
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#12
|
|||
|
|||
Since I did not have the ability to move the chassis inside my shop I had to work on it outside. I constructed a sheet metal roof with tarp sides to protect the inside of the fighting and engine compartments while I painted them.
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored Last edited by Half-Track Guy; 20-04-16 at 19:28. Reason: Edit Picture Links |
#13
|
|||
|
|||
Engine Compartment and other items.
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored Last edited by Half-Track Guy; 20-04-16 at 19:49. |
#14
|
|||
|
|||
Finally, I had the chassis ready for the engine to be reinstalled and in March 2015, with the help of my brother I installed the engine and drove my Sexton for the first time. I was also able to park it in my shop which makes restoration on the rest of the vehicle much easier. I have posted videos of the startup and first drive on YouTube at the links below.
https://www.youtube.com/watch?v=R9syFrrPF6s https://www.youtube.com/watch?v=q5HwFY2HRjw https://www.youtube.com/watch?v=vDkzF3sEwGQ
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored Last edited by Half-Track Guy; 26-04-16 at 19:28. |
#15
|
|||
|
|||
Great project, fantastic to see the first start and drive, most impressed!
Rich.
__________________
C60S Austin Champ x 2 Humber 1 Ton & Trailer |
#16
|
|||
|
|||
Quote:
__________________
Terry Warner - 74-????? M151A2 - 70-08876 M38A1 - 53-71233 M100CDN trailer Beware! The Green Disease walks among us! |
#17
|
|||
|
|||
Thanks Rich and Terry!
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#18
|
|||
|
|||
Very nice!
|
#19
|
|||
|
|||
25 Pounder
When I received my Sexton from SECO it had the section of the barrel that had been cutoff and muzzle brake laying in the floor. I also received one complete set of breach ring parts (less the fire control parts) and about two thirds of a second set along with two breach blocks. When I put the barrel back together I had it sleeved with thick walled pipe and welded. I wanted to be able to have a propane cannon but have it look as original as possible so I had a replica breach ring constructed that would conceal the hardware that makes a propane cannon work.
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#20
|
|||
|
|||
More 25 Pounder pictures. Now I am just waiting on better weather and when I can get enough family and friends together to help me install the gun!
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
#21
|
|||
|
|||
25 Pounder Main Gun Installed
Finally got the 25 Pounder Main Gun installed. Not completely finished yet but at least it looks like a Sexton again. I have posted links below of video of the installation and drive afterwards.
https://youtu.be/pEFnSmgIuic https://youtu.be/_AqnCrpBO28
__________________
1942 M2A1 Half-Track - Restored 1945 Ford GPW - Restored 1966 M151 - Restored 1944 Sexton SPG - Running & 85% Restored 1943 M2 Half-Track - Unrestored 1944 M3 Half-Track - Unrestored 1945 CCKW - Unrestored |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sexton # 130 | SDT16 | The Armour Forum | 31 | 10-08-19 16:16 |
17pdr Sexton | ramtank2 | The Armour Forum | 3 | 19-02-06 00:03 |
Sexton SP gun | Doug Knight | WW2 Military History & Equipment | 0 | 06-01-05 19:07 |
Sexton 25-pdr | Perry Kitson | The Armour Forum | 4 | 27-02-04 20:10 |