#1
|
||||
|
||||
Wanted: 8' CX-4720 Cable for the VRC-20
Hi Guys,
Just as the title says, I need an 8' CX-4720 for the VRC-12 System. My only one is a 14'er, and I'd really like to get a shorter one for a cleaner install. My local contacts only have 18'ers. Also, this is for the 4 Prong MT-1029 to MT-1029 Power Cable and not the one with the Bendix Connector. Hopefully someone has one or else I'll be experimenting with Solder and Heat Shrink. Scotty
__________________
Gone but never forgotten: Sgt Shane Stachnik, Killed in Action on 3 Sept 2006, Panjwaii Afghanistan |
#2
|
|||
|
|||
Hi Scotty,
Are you daisy chaining two RT524s to make a VRC49? The CX4720 has a 4 socket connector on one end and bare wires on the other. The CX4721 is used to connect two MT-1029s together but the cable is only 2.5 ft long. Just checking before I go digging through the junk box. Bruce |
#3
|
||||
|
||||
Quote:
Your right. Jon Skagfeld my friendly Toaster Tech called me and sorted me out on the Cable Configs. Yes, it is in fact a 4721 I need. Did they make these in any shorter lengths? All I can find are either 14 or 18 footers. If an 8' footer was around, that would be great. Failing that, I have a link for a 10 footer. Thanks Scotty
__________________
Gone but never forgotten: Sgt Shane Stachnik, Killed in Action on 3 Sept 2006, Panjwaii Afghanistan |
#4
|
||||
|
||||
The Cable with these ends:
Its going from MT-1029 to MT-1029: Looking again today after work, i'm thinking I may actually need a 10' footer afterall. I know Jon, I know Scotty |
|
|