Wanted: Tire vote: New Production 10.50-16 Sand Tires...

[Philippe Jeanneau]

Since the R-3 tire that I presented for new production is not as popular (though still included here) as I thought, I have a couple of other thread patterns that I would like to consider for a vote... Unfortunately, without your input this project will go nowhere...

Dimensions/specs are the same as before:

Overall Diameter: 886.90 mm or 34.91"

Section Width: 254 mm or 10.0"

Sidewall height: 215 mm or 8.46"

Classification: Agriculture-Industrial Equipment/Implement
Construction: Belted Bias-Ply (TL/TT)
Certification: Same as the existing 10:50 x 16 Chevron tires. This is considered an implement/Agricultural tire and therefore not blocked for importation...

WARNING/NOTE: THIS IS NOT a 55-75 MPH HIGHWAY TIRE.

Style/thread pattern: T.B.D.
Ply: 12
Thread Depth: 15/32
Standard Rim - flange: 6.0 - 8.00

Max Load Range: 1399 KG or 3086 LBS
Pressure: 3 - 4.5 Bar (43 - 65 PSI)
Load Index: 120 (1399 KG/3086 LBS)

Speed rating: F (50 MPH or 80 KM/H)
Weight: 26.3 KG (58 LBS)

So going through the photos top to bottom we can vote for A, B, C, D and E respectively... Thank you.


A



B



C



D



E

[Hanno Spoelstra]

Hello Philip,

From a wartime publication, here is a page with "Sand Type" tyre characteristics to help ID the tyres in your post above:

[Philippe Jeanneau]

Hello Hanno,

Thank you very much for the post... That is the most I have seen regarding the subject, believe it or not...