MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Armour Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 20-07-21, 16:50
Brian Butt Brian Butt is offline
Registered User
 
Join Date: Mar 2019
Location: Ontario, Canada
Posts: 15
Default M8 Greyhound Brakes

I figured I best ask here to see if the knowledgeable folks here would have any idea where to find brake hoses for an M8.
A couple of us are trying to get the M8 belonging to the Ontario Regiment Museum, back on the road. After a few issues with the wheel cylinders, now were are in need of new hose for the rear axle. 17.5 inches long.
Anyone have any ideas where to source one of these.
Reply With Quote
  #2  
Old 20-07-21, 17:25
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

There are companies about that will make you up certified hoses for brakes. NAPA here in town (Brandon) was sending the older brake-lines in to Winnipeg where a company was making them up. That said, they were more expensive than the ones out of the catalogues. Prior to them doing it this way, you determined the size of the hose, the length, the fittings on the end, and you hit the catalogue to find whatever was closest.
Reply With Quote
  #3  
Old 20-07-21, 23:16
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default

I just posted the same in Darryl's thread.
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #4  
Old 01-09-21, 15:32
Brian Butt Brian Butt is offline
Registered User
 
Join Date: Mar 2019
Location: Ontario, Canada
Posts: 15
Default

Well, there's good news and bad news;
We found a source for newly made hoses through a friend. But when refilling the brake system with fluid, we've discovered that all twelve wheel cylinders are leaking.
On the next trip to the museum we will open up one to see if it's the seals or the sleeves that are the issue.
Reply With Quote
  #5  
Old 16-10-21, 17:05
MikeV MikeV is offline
Registered User
 
Join Date: Jul 2019
Location: Whitby Ont, Canada
Posts: 18
Default return to the Brakes for Muesum grey hound

Hi everyone
I am the second half of the team for The M8 brake project . We have had the cylinders re sleeved but, they did a poor job, we installed all the newly done cylinders and they all leaked. we are in the process of honing and getting the grooves out of the new sleeves from the repair, any Idea where we can get the brake cyl. seals that fit in the older grooved pistons, we are running out of options,
thanks for your help. i will post Pics. Later.
Reply With Quote
  #6  
Old 17-10-21, 02:08
maple_leaf_eh maple_leaf_eh is offline
Terry Warner
 
Join Date: Mar 2004
Location: Shouting at clouds
Posts: 3,081
Default M8 brake parts

Have you asked on Steel Soldiers forum? There are restorers there who've seen and done just about everything, or will have the only-one-left-in-existence 3rd line shop manual with the exploded views of everything. There is likely a commercial equivalent.
__________________
Terry Warner

- 74-????? M151A2
- 70-08876 M38A1
- 53-71233 M100CDN trailer

Beware! The Green Disease walks among us!
Reply With Quote
  #7  
Old 25-10-21, 05:38
super dave super dave is offline
Dave Good
 
Join Date: Dec 2003
Location: Onoway, Alberta, Canada
Posts: 683
Default

Quote:
Originally Posted by MikeV View Post
Hi everyone
I am the second half of the team for The M8 brake project . We have had the cylinders re sleeved but, they did a poor job, we installed all the newly done cylinders and they all leaked. we are in the process of honing and getting the grooves out of the new sleeves from the repair, any Idea where we can get the brake cyl. seals that fit in the older grooved pistons, we are running out of options,
thanks for your help. i will post Pics. Later.
I am not sure of the availability of these kits but a friend rebuilt all of his wheel cylinders using the Raybestos MK37 kits that come with the newer style pistons and cups with it and works great.
Attached Images
File Type: jpg IMG_20211024_212551.jpg (196.6 KB, 1 views)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
M8 Greyhound Brake Cylinders Brian Butt The Armour Forum 7 04-10-19 08:30
M8 Greyhound clutch problem Malcolm Towrie The Armour Forum 21 11-10-18 15:58
Ferocious brakes on our M8 Greyhound Malcolm Towrie The Armour Forum 10 27-09-18 02:39
RCD's M8 Greyhound John McGillivray The Armour Forum 14 03-02-12 15:08
M8 Greyhound in Australia. Ryan The Armour Forum 15 14-09-09 13:32


All times are GMT +2. The time now is 22:35.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016