19-Set Mk II Power Cable ID Needed

[David Dunlop]

I have one of the above I would like to know more about.

It came with a complete working Mk II 19-Set Years ago. The Power Supply is American, The Transceiver and Vario Canadian.

The Power Cable has the early pattern 6-pin socket on the end with a 36 inch long wire loom cover. Coming out the open end of this loom are six leads, each 6 inches long and each ending in a brass ring terminal. Two leads are heavy duty guage cable: one with a red tracer has a collar on it marked "TRANS +12V", and the other has a black tracer and a collar marked "TRANS -12V".

The four lighter guage leads are as follows:

- SIGNAL
- HEATERS +12V
- Collar is too dark to read
- The last lead is missing the brass ring terminal and collar.

The main ID Collar up by the 6-Pin Socket, is also very dark and difficult to read. I am reasonably certain about the first two lines but guessing at the last two. I think it all reads as follows:

ZA 1784
PC 76451C/A2
CONNECTOR
6PT #8A2

I would like to identify what type of installation this connector was used with and if it is even 19-Set related.


David