#1
|
|||
|
|||
C8 suspension link rod
I’ve discovered one of my link arms has rotted through. I’m struggling to find one! I’ve attached a photo - are these called link arms or link rods? I think the part number is 046379. All the ones I’ve seen for sale have u shaped sends either end. The ones on my c8 are straightrod to a u shaped link. Any ideas where I could source a pair?
|
#2
|
|||
|
|||
No link to the vendor, nor have I any experience with them:
https://www.applehydraulicsonline.co...ctions/links-1 Owen.
__________________
1940 11 Cab C15 1939 DKW KS200 1951 Willys M38 1936 Opel Olympia MVPA # 39159 MVT # 19406 |
#3
|
|||
|
|||
I've cut the ends off replaced
Hi Richard
I had a similar problem with my Patter 12 C60L, all the threaded ends broke off. Lacking replacement links, measured the rods cut off the damaged section and welded on grade 8 bolts. No problems in 2 years of driving. One of the reasons I went this route was my HUP has broken the original welds on the shock links one at a time over the years. Just ground off the old weld material and rewelded, never have had a new weld brake again. Keep us posted on your progress. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#4
|
|||
|
|||
Richard,
Like Phil, I improvised, as I was unable to find direct replacements. I had new rods made up that I welded to the C-Shaped end. http://www.mapleleafup.net/forums/sh...t=18464&page=5 The washers/retainers and Rubbers are available NOS at LWD parts. https://www.lwdparts.com/product/ret...hock-absorber/ https://www.lwdparts.com/product/gro...hock-absorber/ Jeep-Dodge-GMC in France offer something similar for the US Chev 1,5Ton.....but I am not sure if this is the same as C8 or if it can be modified to work. https://jeep-dodge-gmc.com/smi/descr...rolet/DP039373 Alex
__________________
Chevrolet C8 cab 11 FFW BSA Folding Bicycle |
#5
|
|||
|
|||
Shock links
Here is a photo of mine after I restored them. They are off a standard civilian 1945 Chev truck (not CMP) and look the same, so they should be quite easy to obtain.
|
#6
|
|||
|
|||
Many thanks everyone - that's all good news!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
For Sale: Suspension Rods , NOS BSF | Andrew Rowe | For Sale Or Wanted | 0 | 19-03-14 07:49 |
Suspension bolt CTL 106 | Ben | The Carrier Forum | 1 | 07-11-11 00:48 |
Carrier suspension ? | Dave Schindel | The Carrier Forum | 2 | 05-05-11 04:29 |
Jeep suspension help | karlos59 | For Sale Or Wanted | 3 | 12-10-10 09:55 |
Carrier Suspension | pzrwest | The Carrier Forum | 5 | 22-07-10 15:41 |