#1
|
||||
|
||||
Front driveshaft for a CMP
looking for a Chevy CMP Cab 13 front driveshaft, I have the short part that attaches to the transfer case, not sure if they used different lengths in the front but this one will be going into my CGT. Thanks!
Also have an extra master and booster for a CGT available as well... needs rebuilding |
#2
|
|||
|
|||
Picking up a brand new rear shaft Monday
Hi Stony
I'll be picking up an all new rear drive shaft Monday so will let you know that works out soon. Do you have access to the different parts books to see if the front drive shaft is common across all of 3 ton chassis? Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#3
|
||||
|
||||
Thanks Phil, info seems to be hard to come by online -but from what I can tell if it had the Chevy 216, the front driveshaft should be the same length. Are you having a driveshaft made up?
|
#4
|
|||
|
|||
Yes, brand new
Hi Stony
Yes, I'm having a brand new rear drive shaft for my Pat 13 C60S made, all new off the shelf Spicer parts. (See http://www.mapleleafup.net/forums/sh...ad.php?t=30454 for the how and why.) Choice was reuse some of my "original" drive shaft parts or have a whole new shaft made, I decided to keep the orginal and put it on the shelf with other orginal parts that I've replaced over the years. I'll have more information to share later this week once I've picked it up installed it and road tested the truck. Cheers Phil PS- See the other thread - new shaft was 1 1/4 inches to long. Rats!! They'll fix it but it is a pain.
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com Last edited by Phil Waterman; 24-09-19 at 18:29. Reason: Add Info |
#5
|
|||
|
|||
Based on Chevrolet Parts List No. 197 dated August 1942, all 4x4 CMP from C15A to C60L (including CGT) use the same front axle propeller shaft. It appears that the C60X shaft has some (unknown) difference to cause a different part number so it isn't quite "all CMPs use the same shaft".
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front Axles for 10 bolt Front Hubs-1.5 ton Australian Chevrolet Trucks 1940-1945 | Philippe Jeanneau | The Softskin Forum | 30 | 28-01-22 10:19 |
Front Brake Drums-10 bolt Front Hubs for 1.5 ton Australian Chevrolet Trucks, 40-45 | Philippe Jeanneau | The Softskin Forum | 1 | 10-04-19 20:51 |
Front End Off ?? | Richard Coutts-Smith | The Softskin Forum | 9 | 10-12-09 10:23 |
Bedford military-front and civvy-front types | David_Hayward (RIP) | The Softskin Forum | 67 | 07-01-09 17:20 |
CGT driveshaft wanted | Keith Webb | For Sale Or Wanted | 0 | 27-01-04 08:47 |