Tank Hunter Carrier Progress

[kosbie]

Hi Kevin. Excellent work as always. Do you have any idea why the extra plate rather than the wooden board and why the extra bolt?
Rick

[kevin powles]

When you fire the two pounder there is an auto eject for the spent case which literally flys out the back, you would need to protect the petrol tanks from a smouldering hot brass case, it’s essentially a gun deck, from the photos I have and lack of cut outs in the angle iron both sides indicate lift out steel plates were used, foldered at each end to provide rigidity. Extra bolt is to provide full complete coverage of the petrol tanks, luckily I had an original angle iron plate and good photos of the one at the Canadian war museum.

[kevin powles]

Hi, Does anyone have information on what insignia would have been on WW2 Canadian vehicles in service on the home front in Canada?. i.e. something like this formation sign and tactical/unit sign on the other fender?, I’m looking to apply the marking to my tank hunter carrier.

[kevin powles]

Thanks to all those that have assisted with this over the years, 95% complete but further work to do, I need a 2” bomb thrower if anyone has one available please pm me. Also looking for a recoil shield or details of.

Thanks Kevin.

[Bob Phillips]

Looks great! Glad it went to a good home.

[Petr Brezina]

Very nice!

[kevin powles]

A few pics from a show at the weekend

[Ron Pier]

Very good Kevin. Are there any other restored tank hunters? Ron

[Hanno Spoelstra]

Originally Posted by kevin powles

Thanks to all those that have assisted with this over the years, 95% complete but further work to do

Very nice work, Kevin! Must be a unique example of the breed?

[kevin powles]

Originally Posted by Ron Pier

Very good Kevin. Are there any other restored tank hunters? Ron

The Canadian war museum has one with a 2 pdr artillery piece plonked on top, I’ve seen another in a museum in Canada which has the wrong gun on it. Both pictures attached here.

[Michael R.]

Originally Posted by kevin powles

The Canadian war museum has one with a 2 pdr artillery piece plonked on top, I’ve seen another in a museum in Canada which has the wrong gun on it. Both pictures attached here.

The Canadian ‘wet’ coast is non-original example as Kevin points out… a brilliant fellow did excellent work on it and other unique Canadian military vehicles. Harry Moon may know a little more ?

[Ed Storey]

Originally Posted by kevin powles

The Canadian war museum has one with a 2 pdr artillery piece plonked on top, I’ve seen another in a museum in Canada which has the wrong gun on it. Both pictures attached here.

From my own experience with Canadian museums, I wouldn't put much faith in anything they restored or have on display as being accurate, or authentic.

[Richard Salter]

Kevin your carrier looks great well done

[kevin powles]

Originally Posted by Richard Salter

Kevin your carrier looks great well done

Thanks, Need to get it to your show !

[Richard Salter]

That wood be good great attraction for something so rare.

[Tim Bell]

Originally Posted by kevin powles

I need a 2” bomb thrower if anyone has one available please pm me. Also looking for a recoil shield or details of.

Thanks Kevin.

Which version of the 2in bomb thrower are you looking for?

Do you have a photo?